Cosmostreamer for DJI FPV Goggles V1/V2

From Cosmostreamer Wiki
Revision as of 21:51, 10 December 2023 by Admin (talk | contribs)
Jump to navigation Jump to search

Product page

https://cosmostreamer.com/products/djifpvgoggles/diy/

Hardware

Cosmostreamer for DJI FPV Goggles V1/V2 can work on these boards:

Raspberry Pi 4B

Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.

  • Two micro-HDMI outs
  • Analog video out (CVBS, TV-out) in 3.5 mini-jack
  • DSI display may be used. If DSI display connected - only HDMI-0 may be used.
  • Wi-Fi 2.4/5 GHz
  • Ethernet 10/100/1000 Mbit/s
  • 2 USB 2.0 ports + 2 USB 3.0 ports
  • 1 USB-C port (can be used as power input)


Raspberry Pi 3B/3B+

  • HDMI port
  • Analog video out (CVBS, TV-out) in 3.5 mini-jack
  • DSI display may be used. If DSI display connected - HDMI can't be used.
  • Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
  • Ethernet 10/100/1000 Mbit/s
  • 4 USB 2.0 ports
  • 1 micro-USB port for power in


Raspberry Pi Zero/ZeroW

Not supported due slow CPU


Raspberry Pi Zero2W

  • Mini-HDMI port
  • Wi-Fi 2.4GHz/5GHz
  • Micro-USB port for power in



Installing the Cosmostreamer firmware

  1. Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
  2. Download ZIP-archive with firmware content
  3. Extract .img file from downloaded ZIP archive
  4. Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
  5. Insert the microSD card into the Raspberry Pi
  6. If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port)
  7. Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter Power for Raspberry Pi). Raspberry Pi must start booting. A couple of reboots may be during the first boot


Power for Raspberry Pi

Power with standard Micro-USB or USB-C port

USB-C port on Raspberry Pi 4, micro-USB port on Raspberry Pi 3 B/B+/Zero/ZeroW/Zero2W

Power with GPIO (pins)

Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
rpi-gpio-pwr.jpg

Power with PoE

Only for Raspberry Pi 4B and 3B+. Need to use PoE Hat.
poe-hat-small.jpg


Network connection

Ethernet

Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side

Wi-Fi

Connect your PC/Mac or smartphone to Wi-Fi network cosmostreamer, password 1234512345

Settings and controls

Browser

Also you could open Cosmostreamer web admin page in browser
http://192.168.50.1
http://my.cosmostreamer.com
http://cosmostreamer.local

Windows application

Download, install and run CosmoViewerNG application.

Mac application

Download, install and run CosmoViewerNG application.

Firmware update

  1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
  2. Download the Latest firmware update file
  3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
  4. Raspberry Pi must goes to reboot automatically after update installed


Changing camera type

In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera".
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so need to change a "camera type" for using with DJI Goggles V1/V2.

  1. Open device settings in CosmoViewerNG application or in web interface
  2. Go to chapter "Info"
  3. Choose camera type "DJI FPV Goggles V1/V2"
  4. Disable option "Allow auto detection" if enabled
  5. Don't forget to click "Save" button.


License key

License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process.

  1. Buy license key on a product page
  2. Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [email protected] for making a license key
  3. When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.



DJI FPV Goggles V1/V2 connection

Use any standard USB-C cable and plug it into any of four USB-A ports on Raspberry Pi.
djifpvgoggles-rpi.jpg


Cooperative with DJI Goggles2/Integra

In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/Integra, without a manual changing a "camera type". 

Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/Integra" must be already installed!
  1. Open device settings in CosmoViewerNG application or in web interface
  2. Go to chapter "Info"
  3. Choose camera type "DJI Goggles2/Integra" or "DJI FPV Goggles V1/V2"
  4. Enable option "Allow auto detection"
  5. Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture.


Downloads

  1. Full microSD image with firmware
  2. Latest firmware update file
  3. Changelog file
  4. All files



FAQ

Which goggles version is supported?

DJI FPV Goggles V1 and V2

Does it works with DJI Goggles2 or Integra?

No, need to use another camera type "DJI Goggles2/Integra" with another license key

Can I just unplug the power cable from the box?

Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

Retrieved from "https://cosmostreamer.com/wiki/index.php?title=Cosmostreamer_for_DJI_FPV_Goggles_V1/V2&oldid=434"