You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

CosmostreamerDJI FPV Goggles V1/V2

Buy now
DIY

Features

  • Video reception is supported from DJI FPV Goggles V1 and DJI FPV Goggles V2
  • Clean video can be output via one or two micro-HDMI ports with ultra-low latency
  • Video stream resolution: 1280x720@60 for V1, 1440x810@60 for V2
  • Video restreaming is supported over network protocols including: RTSP, SRT, RTMP, RTP, MPEG-TS, NDI, NDI|HX, and raw UDP H.264

Compatible goggles

  • DJI FPV Goggles V1
  • DJI FPV Goggles V2

Compatible air units and drones

If goggles can be paired with the drone or air unit and show video - the same video will be available in Cosmostreamer.

  • DJI O3 Air Unit
  • DJI Air Unit (old)
  • Caddx Vista

Items available for purchase

These are all the Cosmostreamer versions you can purchase - either fully assembled or as a DIY license.

01

DIY license key for V1/V2


It's just a string of text (a license key) that must be saved in the Cosmostreamer settings for the software to work.

Included: license key for V1/V2, email/Whatsapp/Telegram support.

Hardware not included!

Follow the DIY instructions

$25
02

Cosmostreamer Box for DJI Googles3/Goggles2/Integra/N3/V1/V2


Based on Raspberry Pi 4B. Two micro-HDMI outputs, Wi-Fi 2.4/5GHz, Ethernet 10/100/1000 Mbit/s, 4 USB ports.

Included: hardware, license keys for V1/V2 and G2/G3/Integra/N3, email/Whatsapp/Telegram support.

 

 

 

$295
03

Cosmostreamer Display Box for DJI Googles3/Goggles2/Integra/N3/V1/V2


Based on Raspberry Pi 4B. IPS display 4.3", 800x480 pixels. One micro-HDMI output, Wi-Fi 2.4/5GHz, Ethernet 10/100/1000 Mbit/s, 4 USB ports.

Included: hardware, license keys for V1/V2 and G2/G3/Integra/N3, email/Whatsapp/Telegram support.

 

 

 

$349
04

Cosmostreamer Ultra


This is a device build by another person using the same Cosmostreamer software and licenses!

Based on Raspberry Pi 4B. 7" TFT display, 800x480 pixels. One micro-HDMI output, Wi-Fi 2.4/5GHz, Ethernet 10/100/1000 Mbit/s, 4 USB ports.

Included: hardware, license keys for V1/V2 and G2/G3/Integra/N3, email/Whatsapp/Telegram support.

$599

DIY

This is the cheapest and fastest way to get a Cosmostreamer!

Go to DIY page

Download

FAQ

Q: Can I have a video on both HDMI ports?
A: Yes, video output on both HDMI ports, but both HDMI displays should be connected before Cosmostreamer device powered on. If Cosmostreamer device has built-in display - only one HDMI will be available for video output.

Q: Clean HDMI video without OSD?
A: Goggles V1 and V2 does not support OSD, so only clean video on HDMI is available

Q: Can I just unplug the power cable from the box?
A: Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

Q: Does it work with DJI FPV Goggles2, Goggles3, Integra or Goggles N3?
A: The license for Goggles V1/V2 does not work with Goggles2/3/Integra/N3, need to use another license. But Cosmostreamer devices in the shop already contains the licenses for Goggles2/3/Integra/N3 and Goggles V1/V2

Video reviews

 

Contacts

If you have any questions about Cosmostreamer, fill the form below. We will be happy to help you!

Check your spam folder, the answer may be there.