Cosmostreamer for DJI Pocket 3

From Cosmostreamer Wiki
Revision as of 23:27, 13 December 2023 by Admin (talk | contribs)
Jump to navigation Jump to search

Product page



Hardware

Cosmostreamer for DJI Pocket 3 can work on these boards:

Raspberry Pi 4B

Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.

  • Two micro-HDMI outs
  • Analog video out (CVBS, TV-out) in 3.5 mini-jack
  • DSI display may be used. If DSI display connected - only HDMI-0 may be used.
  • Wi-Fi 2.4/5 GHz
  • Ethernet 10/100/1000 Mbit/s
  • 2 USB 2.0 ports + 2 USB 3.0 ports
  • 1 USB-C port (can be used as power input)


Raspberry Pi 3B/3B+

  • HDMI port
  • Analog video out (CVBS, TV-out) in 3.5 mini-jack
  • DSI display may be used. If DSI display connected - HDMI can't be used.
  • Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
  • Ethernet 10/100/1000 Mbit/s
  • 4 USB 2.0 ports
  • 1 micro-USB port for power in




Installing the Cosmostreamer firmware

  1. Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
  2. Download ZIP-archive with firmware content
  3. Extract .img file from downloaded ZIP archive
  4. Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
  5. Insert the microSD card into the Raspberry Pi
  6. If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port)
  7. Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter Power for Raspberry Pi). Raspberry Pi must start booting. A couple of reboots may be during the first boot



Power for Raspberry Pi

Power with standard Micro-USB or USB-C port

USB-C port on Raspberry Pi 4, micro-USB port on Raspberry Pi 3 B/B+


Settings and controls


Browser

Video in browser may not work properly, need to switch photo/video mode

Also you could open Cosmostreamer web admin page in browser
http://192.168.50.1
http://my.cosmostreamer.com
http://cosmostreamer.local

Windows application

Download, install and run CosmoViewerNG application.

Mac application

Video in app window may not work properly, need to switch photo/video mode

Download, install and run CosmoViewerNG application.


Firmware update

  1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
  2. Download the Latest firmware update file
  3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
  4. Raspberry Pi must goes to reboot automatically after update installed



Changing camera type

In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera".
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so need to change a "camera type" for using with DJI Goggles V1/V2.

  1. Open device settings in CosmoViewerNG application or in web interface
  2. Go to chapter "Info"
  3. Choose camera type "DJI Pocket 3"
  4. Don't forget to click "Save" button.