Cosmostreamer for DJI Goggles2/Integra

From Cosmostreamer Wiki
Revision as of 16:35, 10 December 2023 by Admin (talk | contribs) (→‎License key)
Jump to navigation Jump to search

Installing the Cosmostreamer firmware

  1. Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
  2. Download ZIP-archive with firmware content
  3. Extract .img file from downloaded ZIP archive
  4. Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
  5. Insert the microSD card into the Raspberry Pi
  6. If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI0- port (nearest to USB-C port)
  7. Plug a standard USB power supply or powerbank to the Raspberry Pi GPIO pins (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.


Power for Raspberry Pi

For using with DJI Goggles2/Integra Raspberry Pi 4 must be powered ONLY from GPIO or from PoE or via USB-C port with custom cable.

Power with GPIO (pins)

Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
rpi-gpio-pwr.jpg

Power with USB-C port

USB-C port on Raspberry Pi 4 is busy by Goggles2/Integra connection, so need to made a custom USB cable with additional part for power.
usb-c-with-power-cable2-small.jpg
usb-c-power-cable-scheme-small.jpg

Power with PoE

Only for Raspberry Pi 4B and 3B+. Need to use PoE Hat.
poe-hat-small.jpg


Network connection

Ethernet

Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side

Wi-Fi

Connect your PC/Mac or smartphone to Wi-Fi network cosmostreamer, password 1234512345

Settings and controls

Browser

Also you could open Cosmostreamer web admin page in browser
http://192.168.50.1
http://my.cosmostreamer.com
http://cosmostreamer.local

Windows application

Download, install and run CosmoViewerNG application.

Mac application

Download, install and run CosmoViewerNG application.

Firmware update

  1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
  2. Download the Latest firmware update file
  3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
  4. Raspberry Pi must goes to reboot automatically after update installed


Changing camera type

In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera".
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:

  1. Open device settings in CosmoViewerNG application or in web interface, go to chapter "Info". Choose camera type "DJI Goggles2/Integra". Don't forget to click "Save" button.


License key

License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process.

  1. Buy license key on a product page
  2. Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [email protected] for making a license key
  3. When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.


Retrieved from "https://cosmostreamer.com/wiki/index.php?title=Cosmostreamer_for_DJI_Goggles2/Integra&oldid=379"