Difference between revisions of "Cosmostreamer for DJI Goggles2/Integra"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
# Extract .img file from downloaded ZIP archive | # Extract .img file from downloaded ZIP archive | ||
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card | # Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card | ||
# Insert the microSD card into the Raspberry Pi | |||
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI0- port (nearest to USB-C port) | |||
# Plug a standard USB power supply or powerbank to the Raspberry Pi GPIO pins (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process. | |||
Revision as of 15:26, 10 December 2023
Installing the Cosmostreamer firmware
- Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
- Download ZIP-archive with firmware content
- Extract .img file from downloaded ZIP archive
- Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
- Insert the microSD card into the Raspberry Pi
- If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI0- port (nearest to USB-C port)
- Plug a standard USB power supply or powerbank to the Raspberry Pi GPIO pins (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.