Difference between revisions of "Cosmostreamer for DJI Go4 drones"
Jump to navigation
Jump to search
| Line 29: | Line 29: | ||
* 2 USB 2.0 ports + 2 USB 3.0 ports | * 2 USB 2.0 ports + 2 USB 3.0 ports | ||
* 1 USB-C port (used for drone controller connection) | * 1 USB-C port (used for drone controller connection) | ||
<br><br><br> | |||
==Installing the Cosmostreamer firmware== | |||
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader | |||
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content | |||
# Extract .img file from downloaded ZIP archive | |||
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card | |||
# Insert the microSD card into the Raspberry Pi | |||
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port) | |||
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process. | |||
<br><br><br> | |||
==Power for Raspberry Pi== | |||
For using with DJI Go4 drones controllers Raspberry Pi 4 must be powered ONLY from GPIO or from PoE or via USB-C port with custom cable. | |||
<br><br><br> | |||
===Power with GPIO (pins)=== | |||
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.<br> | |||
[https://cosmostreamer.com/img/rpi-gpio-pwr.jpg https://cosmostreamer.com/img/rpi-gpio-pwr.jpg] | |||
<br><br><br> | |||
===Power with USB-C port=== | |||
USB-C port on Raspberry Pi 4 is busy by DJI drone controller connection, so need to made a custom USB cable with additional part for power.<br> | |||
[https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-with-power-cable-rcn1.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-with-power-cable-rcn1.jpg]<br> | |||
[https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-power-cable-scheme-rcn1.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-power-cable-scheme-rcn1-small.jpg] | |||
<br><br><br> | <br><br><br> | ||
Revision as of 16:45, 13 December 2023
Product page
http://cosmostreamer.com/products/djigo4drones/
Demo video
Supported Drones
Any drone which work with DJI Go4 application.
- DJI Phantom 4 Pro V2.0
- DJI Mavic Pro
- DJI Macic 2 Pro
- DJI Mavic 2
- DJI Inspire 2
Hardware
Cosmostreamer for DJI Go4 drones can work on these boards:
Raspberry Pi 4B
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
- Two micro-HDMI outs, both can be used for video output
- Analog video out (CVBS, TV-out) in 3.5 mini-jack
- DSI display may be used. If DSI display connected - video output available only on this display + HDMI-0 port.
- Wi-Fi 2.4/5 GHz
- Ethernet 10/100/1000 Mbit/s
- 2 USB 2.0 ports + 2 USB 3.0 ports
- 1 USB-C port (used for drone controller connection)
Installing the Cosmostreamer firmware
- Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
- Download ZIP-archive with firmware content
- Extract .img file from downloaded ZIP archive
- Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
- Insert the microSD card into the Raspberry Pi
- If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
- Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter Power for Raspberry Pi). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
Power for Raspberry Pi
For using with DJI Go4 drones controllers Raspberry Pi 4 must be powered ONLY from GPIO or from PoE or via USB-C port with custom cable.
Power with GPIO (pins)
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
Power with USB-C port
USB-C port on Raspberry Pi 4 is busy by DJI drone controller connection, so need to made a custom USB cable with additional part for power.
