Cosmostreamer for DJI FPV Goggles V1/V2

From Cosmostreamer Wiki
Revision as of 19:43, 10 December 2023 by Admin (talk | contribs) (Created page with "==Product page== [https://cosmostreamer.com/products/djifpvgoggles/diy/ https://cosmostreamer.com/products/djifpvgoggles/diy/] <br><br> ==Hardware== Cosmostreamer for DJI FPV Goggles V1/V2 can work on these boards:<br> ===Raspberry Pi 4B=== Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb. * Two micro-HDMI outs * Analog video out (CVBS, TV-out) in 3.5 mini-jack * DSI display may be used. If DSI display connected - only HDMI-0 may be used. * Wi-Fi 2.4/5 GHz * Ethernet 10/100/1000 Mbit/s...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Product page

https://cosmostreamer.com/products/djifpvgoggles/diy/

Hardware

Cosmostreamer for DJI FPV Goggles V1/V2 can work on these boards:

Raspberry Pi 4B

Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.

  • Two micro-HDMI outs
  • Analog video out (CVBS, TV-out) in 3.5 mini-jack
  • DSI display may be used. If DSI display connected - only HDMI-0 may be used.
  • Wi-Fi 2.4/5 GHz
  • Ethernet 10/100/1000 Mbit/s
  • 2 USB 2.0 ports + 2 USB 3.0 ports
  • 1 USB-C port (can be used as power input)


Raspberry Pi Zero/ZeroW

Not supported due slow CPU


Raspberry Pi Zero2W

  • Mini-HDMI port
  • Wi-Fi 2.4GHz/5GHz


Raspberry Pi 3B/3B+

  • HDMI port
  • Analog video out (CVBS, TV-out) in 3.5 mini-jack
  • DSI display may be used. If DSI display connected - HDMI can't be used.
  • Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
  • Ethernet 10/100/1000 Mbit/s
  • 4 USB 2.0 ports