Streaming into vMix
From CosmoViewerNG to vMix
RTSP over UDP
In CosmoViewerNG application settings, chapter "Restreaming", tab "MediaMTX" (turn on option "Enable MediaMTX server". Copy field "RTSP link".
rtsp://127.0.0.1:8554/stream
In vMix input setting choose "Stream/SRT", Stream Type "RTSP over UDP", paste RTSP link into field "URL".
RTSP over TCP
In CosmoViewerNG application settings, chapter "Restreaming", tab "MediaMTX" (turn on option "Enable MediaMTX server". Copy field "RTSP link".
rtsp://127.0.0.1:8554/stream
In vMix input setting choose "Stream/SRT", Stream Type "RTSP over TCP", paste RTSP link into field "URL".
Transport Stream over UDP
In CosmoViewerNG application settings, chapter "Restreaming", tab "MPEG-TS UDP" (turn on option "Enabled". Fill "Destination" field as
127.0.0.1:3002
In vMix input setting choose "Stream/SRT", Stream Type "Transport Stream over UDP", set "Port" to 3002.
Transport Stream over TCP
VLC
VLC RTMP
In CosmoViewerNG application settings, chapter "Restreaming", tab "MediaMTX" (turn on option "Enable MediaMTX server").
RTMP link looks like this:
rtmp://127.0.0.1:1935/stream
In vMix input setting choose "Stream/SRT", Stream Type "VLC (RTMP, UDP, RTP, RTSP, TS)", paste RTMP link into field "URL".
VLC UDP
VLC RTP
VLC RTSP
In CosmoViewerNG application settings, chapter "Restreaming", tab "MediaMTX" (turn on option "Enable MediaMTX server". Copy field "RTSP link".
rtsp://127.0.0.1:8554/stream
In vMix input setting choose "Stream/SRT", Stream Type "VLC (RTMP, UDP, RTP, RTSP, TS)", paste RTSP link into field "URL".
VLC TS
In CosmoViewerNG application settings, chapter "Restreaming", tab "MPEG-TS UDP" (turn on option "Enabled". Fill "Destination" field as
127.0.0.1:3002
In vMix input setting choose "Stream/SRT", Stream Type "VLC (RTMP,UDP,RTP,RTSP,TS)", set "URL" to:
udp://@:3002
SRT (Caller)
In CosmoViewerNG application settings, chapter "Restreaming", tab "MediaMTX" (turn on option "Enable MediaMTX server".
SRT link looks like this
srt://127.0.0.1:8890?streamid=read:stream
But this link is not needed for vMix.
In vMix input setting choose "Stream/SRT", Stream Type "SRT (Caller)", and fill values:
"Hostname": 127.0.0.1 "Port": 8890 "Stream ID": read:stream
NDI
In CosmoViewerNG application settings, chapter "Restreaming", tab "NDI", turn on option "Enable NDI output".
In vMix input settings choose "NDI / Desktop Capture". Choose stream with default name "CosmoViewerNG NDI stream".
NDI | HX
NDI stream with H264 packets inside. Less bandwidth rather the regular NDI.
In CosmoViewerNG application settings, chapter "Restreaming", tab "NDI | HX", turn on option "Enable NDI|HX output".
In vMix input settings choose "NDI / Desktop Capture". Choose stream with default name "CosmoViewerNG NDI HX stream".