Cosmostreamer for DJI Goggles2/Integra

From Cosmostreamer Wiki
Jump to navigation Jump to search

Installing the Cosmostreamer firmware

  1. Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
  2. Download ZIP-archive with firmware content
  3. Extract .img file from downloaded ZIP archive
  4. Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
  5. Insert the microSD card into the Raspberry Pi
  6. If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI0- port (nearest to USB-C port)
  7. Plug a standard USB power supply or powerbank to the Raspberry Pi GPIO pins (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.


Power for Raspberry Pi

For using with DJI Goggles2/Integra Raspberry Pi 4 must be powered ONLY from GPIO or from PoE or via USB-C port with custom cable.

Power with GPIO (pins)

Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
rpi-gpio-pwr.jpg

Power with USB-C port

USB-C port on Raspberry Pi 4 is busy by Goggles2/Integra connection, so need to made a custom USB cable with additional part for power.
usb-c-with-power-cable2-small.jpg
usb-c-power-cable-scheme-small.jpg

Power with PoE

Only for Raspberry Pi 4B and 3B+. Need to use PoE Hat.
poe-hat-small.jpg

Retrieved from "https://cosmostreamer.com/wiki/index.php?title=Cosmostreamer_for_DJI_Goggles2/Integra&oldid=364"