Cosmostreamer for DJI RC Pro/Pro2/Plus

From Cosmostreamer Wiki
Revision as of 14:02, 22 August 2026 by Admin (talk | contribs)
Jump to navigation Jump to search

Product page

Not ready yet

Demo video

Coming soon...

Supported Controllers

  • DJI RC2
  • DJI RC Pro
  • DJI RC Pro 2
  • DJI RC Plus
  • DJI RC Plus 2


Supported Drones

Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers. 

No video, no telemetry, control only!!!

Tested with:

  • DJI Mavic 4 Pro and DJI RC Pro 2
  • DJI Matrice M300 and DJI RC Plus


Hardware

Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:

  • Raspberry Pi 4B
  • Raspberry Pi 3B/3B+
Raspberry Pi 5 is not supported!



Power for Raspberry Pi

You can use a standard USB cable for the Raspberry Pi power.

Common connections scheme

Add image...

Installing the Cosmostreamer firmware

  1. Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
  2. Download ZIP-archive with firmware content
  3. Extract .img file from downloaded ZIP archive
  4. Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
  5. Insert the microSD card into the Raspberry Pi
  6. If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
  7. Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter Power for Raspberry Pi). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
  8. MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter Firmware update).




Network connection

Ethernet

Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side

Wi-Fi

Connect your PC/Mac or smartphone to Wi-Fi network cosmostreamer, password 1234512345

USB

It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.

From Iphone

1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust".
2. Turn on modem mode on the Iphone.
3. Run CosmoViewerNG app for IOS

From Android smartphone

1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4.
2. Turn on modem mode on the smartphone.
3. Run CosmoViewerNG app for Android

Settings and controls

Browser In Wi-Fi Access Point mode

Also you could open Cosmostreamer web admin page in browser

http://192.168.50.1
http://my.cosmostreamer.com

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

Browser in WLAN client mode

Open in browser http://cosmostreamer.local
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

Browser with Iphone USB modem mode

Open in browser http://172.20.10.2
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

Windows application

Download, install and run CosmoViewerNG application.

Mac application

Download, install and run CosmoViewerNG application


Firmware update

Don't skip ths step, because the microSD image does not contains a latest firmware version!
  1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
  2. Download the Latest firmware update file
  3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
  4. Raspberry Pi must goes to reboot automatically after update installed



Changing camera type

In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera".
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".

  1. Open device settings in CosmoViewerNG application or in web interface
  2. Go to chapter "Info"
  3. Choose camera type #38 - "DJI RC Pro/Pro2"
  4. Don't forget to click "Save" button.



License key

License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process.

  1. Buy license key on a product page
  2. Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on cosmostreamer@gmail.com for making a license key
  3. When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.



Controller connection



Joystick connection



Control panel connection

===Bitfocus Companion for Streamdeck

Downloads



FAQ

Can I just unplug the power cable from the box?

Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

Retrieved from "https://cosmostreamer.com/wiki/index.php?title=Cosmostreamer_for_DJI_RC_Pro/Pro2/Plus&oldid=1695"