Cosmostreamer for DJI SDR with DJI gimbals
Jump to navigation
Jump to search
Product page
https://cosmostreamer.com/products/djisdr/
Video review
No reviewes yet.
Supported Gimbals
All DJI gimbals which officially supported by DJI SDR. Tested with DJI RS4 and DJI RS4 Pro.
Hardware
Cosmostreamer for DJI SDR can work on these boards:
Raspberry Pi 4B
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
- Two micro-HDMI outs
- Analog video out (CVBS, TV-out) in 3.5 mini-jack
- DSI display may be used. If DSI display connected - only HDMI-0 may be used.
- Wi-Fi 2.4/5 GHz
- Ethernet 10/100/1000 Mbit/s
- 2 USB 2.0 ports + 2 USB 3.0 ports
- 1 USB-C port (used for DJI SDR connection)
Raspberry Pi 5
Not supported
Without a hardware video decoder this is a bad choice for using with Cosmostreamer.
Raspberry Pi Zero/ZeroW
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
Raspberry Pi Zero2W
- Mini-HDMI port
- Wi-Fi 2.4GHz/5GHz
Not tested by should work
Raspberry Pi 3B/3B+
Not supported due USB incompatibility