Difference between revisions of "Cosmostreamer for DJI Goggles2/Integra"
| Line 59: | Line 59: | ||
<br> | <br> | ||
==Firmware update | ==Firmware update== | ||
#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" | #Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" | ||
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] | #Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] | ||
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button | #Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button | ||
#Raspberry Pi must goes to reboot automatically after update installed | #Raspberry Pi must goes to reboot automatically after update installed | ||
Revision as of 16:24, 10 December 2023
Installing the Cosmostreamer firmware
- Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
- Download ZIP-archive with firmware content
- Extract .img file from downloaded ZIP archive
- Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
- Insert the microSD card into the Raspberry Pi
- If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI0- port (nearest to USB-C port)
- Plug a standard USB power supply or powerbank to the Raspberry Pi GPIO pins (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
Power for Raspberry Pi
For using with DJI Goggles2/Integra Raspberry Pi 4 must be powered ONLY from GPIO or from PoE or via USB-C port with custom cable.
Power with GPIO (pins)
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
Power with USB-C port
USB-C port on Raspberry Pi 4 is busy by Goggles2/Integra connection, so need to made a custom USB cable with additional part for power.
Power with PoE
Only for Raspberry Pi 4B and 3B+. Need to use PoE Hat.
Network connection
Ethernet
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
Wi-Fi
Connect your PC/Mac or smartphone to Wi-Fi network cosmostreamer, password 1234512345
Settings and controls
Browser
Also you could open Cosmostreamer web admin page in browser
http://192.168.50.1
http://my.cosmostreamer.com
http://cosmostreamer.local
Windows application
Download, install and run CosmoViewerNG application.
Mac application
Download, install and run CosmoViewerNG application.
Firmware update
- Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
- Download the Latest firmware update file
- Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
- Raspberry Pi must goes to reboot automatically after update installed