Cosmostreamer settings

Cosmostreamer settings available in web interface, in CosmoViewerNG application for Windows and in CosmoViewerNG application for Mac.

Settings are the same, in this document I will use a web interface for the screenshots.

How to open Cosmostreamer device settings

Web interface

Click icon in the right bottom corner and choose "Device settings" item in the menu.

CosmoViewerNG for Windows

Connect PC to the Cosmostreamer device, then click icon with gears in the left panel (second from the top).

CosmoViewertNG for Mac

Connect Mac to the Cosmostreamer device, then click icon in the right bottom corner and choose "Device settings" item in the menu.

Settings Chapters

Info

Board model

Microcomputer model (Raspberry Pi model and revision)

Firmware version

Current version of Cosmostreamer

Device name

A human-readable name of the device, used in the device list in CosmoViewerNG app

Camera type

For historical reasons, all devices that work with the Cosmostreamer are referred to as a "Camera" - even if the device is not actually a camera, but, for example, a pair of DJI goggles, or DJI SDR receiver, or any other supported device. So let's say this is a "license type".

Allow auto detection

This option is shown only for certain "Camera types," such as DJI Goggles or DJI Fly drones. When enabled, Cosmostreamer attempts to automatically detect the connected camera type and switch to the appropriate "Camera type" making manual switching unnecessary.

Need to disable this option (if enabled) before changing or entering a new license key!

License

Camera type

Current "Camera type" choosen in chapter "Info".

Board ID

A hex-string, unique for each Raspberry Pi or any other microcontroller used for Cosmostreamer. Board ID never changes on the same Raspberry Pi after firmware update or any other manipulations.

QR code

Image contains Board ID and current firmware version in text form like this:

board_id=9127A1E6CEB16469F4D4F6563B138360CA78A1E2757E2376C39FC56824CB5BD3;app_type=23;ver=0.22.5;new=1

License key

Text string with the license key for current "Camera type" and Board ID. License keys stored independently for each "Camera type".

License key CAN'T be transfered from one Raspberry Pi to another!!!

"Install license key" button

Click on this button and entered key will be saved on microSD.

Multiple licenses archive uploading

May be used for uploading a .csuf file with two or more license keys inside.

Secondary camera

It's possible to use a two "Camera types" at the same time, but with some limitations and not for any type of the device. Only video will be available from this camera, no control, no telemetry.
For example, possible to use "DJI Goggles2/3/Integra/N3" and "DJI Goggles V1/V2" together. Or "DJI Goggles2/3/Integra/N3" and a "Webcam".

Not all combinations of main and secondary cameras have been tested!

Tested only on Raspberry Pi 4!

Enable

Enable/disable secondary camera.

Secondary camera type

The same as a "Camera type" in chapter "Info", but here are not all types in this list.
At current time available options:

• DJI Goggles V1/V2
• DJI Goggles2/3/Integra/N3
• RTMP Receiver
• Webcam
• Cosmostreamer Remote Client (license is not needed)

Before using in this list need to enter license for this "Camera type" as when it used as a main camera!

Show video on

Video port used for the secondary camera. HDMI-0, HDMI-1 or DSI.
Video may be full-screen on windowed (check next params).