Difference between revisions of "Cosmostreamer for DJI SDR with DJI gimbals"
Jump to navigation
Jump to search
| Line 42: | Line 42: | ||
===Raspberry Pi 3B/3B+=== | ===Raspberry Pi 3B/3B+=== | ||
<pre style="color: red">Not supported due USB incompatibility</pre> | <pre style="color: red">Not supported due USB incompatibility</pre> | ||
<br><br> | <br><br><br> | ||
==Installing the Cosmostreamer firmware== | |||
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader | |||
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content | |||
# Extract .img file from downloaded ZIP archive | |||
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card | |||
# Insert the microSD card into the Raspberry Pi | |||
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port) | |||
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process. | |||
<br><br><br> | |||
Revision as of 19:02, 13 June 2025
Product page
https://cosmostreamer.com/products/djisdr/
Video reviews
No reviewes yet.
Supported Gimbals
All DJI gimbals which officially supported by DJI SDR. Tested with DJI RS4 and DJI RS4 Pro.
Hardware
Cosmostreamer for DJI SDR can work on these boards:
Raspberry Pi 4B
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
- Two micro-HDMI outs
- Analog video out (CVBS, TV-out) in 3.5 mini-jack
- DSI display may be used. If DSI display connected - only HDMI-0 may be used.
- Wi-Fi 2.4/5 GHz
- Ethernet 10/100/1000 Mbit/s
- 2 USB 2.0 ports + 2 USB 3.0 ports
- 1 USB-C port (used for DJI SDR connection)
Raspberry Pi 5
Not supported
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
Raspberry Pi Zero/ZeroW
Not supported due too slow single-core CPU
Raspberry Pi Zero2W
Not tested but should work
- Mini-HDMI port
- Wi-Fi 2.4GHz/5GHz
Raspberry Pi 3B/3B+
Not supported due USB incompatibility
Installing the Cosmostreamer firmware
- Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
- Download ZIP-archive with firmware content
- Extract .img file from downloaded ZIP archive
- Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
- Insert the microSD card into the Raspberry Pi
- If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
- Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter Power for Raspberry Pi). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.