Difference between revisions of "Cosmostreamer for DJI FPV Goggles V1/V2"
Jump to navigation
Jump to search
| Line 43: | Line 43: | ||
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card | # Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card | ||
# Insert the microSD card into the Raspberry Pi | # Insert the microSD card into the Raspberry Pi | ||
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port | # If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port) | ||
# Plug a standard USB power supply or powerbank to the Raspberry Pi | # Plug a standard USB power supply or powerbank to the Raspberry Pi (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process. | ||
<br> | <br> | ||
Revision as of 19:54, 10 December 2023
Product page
https://cosmostreamer.com/products/djifpvgoggles/diy/
Hardware
Cosmostreamer for DJI FPV Goggles V1/V2 can work on these boards:
Raspberry Pi 4B
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
- Two micro-HDMI outs
- Analog video out (CVBS, TV-out) in 3.5 mini-jack
- DSI display may be used. If DSI display connected - only HDMI-0 may be used.
- Wi-Fi 2.4/5 GHz
- Ethernet 10/100/1000 Mbit/s
- 2 USB 2.0 ports + 2 USB 3.0 ports
- 1 USB-C port (can be used as power input)
Raspberry Pi 3B/3B+
- HDMI port
- Analog video out (CVBS, TV-out) in 3.5 mini-jack
- DSI display may be used. If DSI display connected - HDMI can't be used.
- Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
- Ethernet 10/100/1000 Mbit/s
- 4 USB 2.0 ports
- 1 micro-USB port for power in
Raspberry Pi Zero/ZeroW
Not supported due slow CPU
Raspberry Pi Zero2W
- Mini-HDMI port
- Wi-Fi 2.4GHz/5GHz
- Micro-USB port for power in
Installing the Cosmostreamer firmware
- Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
- Download ZIP-archive with firmware content
- Extract .img file from downloaded ZIP archive
- Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
- Insert the microSD card into the Raspberry Pi
- If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port)
- Plug a standard USB power supply or powerbank to the Raspberry Pi (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.