Difference between revisions of "Cosmostreamer for DJI Goggles2/Integra"

From Cosmostreamer Wiki
Jump to navigation Jump to search
Line 16: Line 16:
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.


<span class="plainlinks">[https://linktopage /img/rpi-gpio-pwr.jpg]</span>
<span class="plainlinks">[https://linktopage https://cosmostreamer.com/img/rpi-gpio-pwr.jpg]</span>


===Power with USB-C port===
===Power with USB-C port===
===Power with PoE===
===Power with PoE===

Revision as of 15:45, 10 December 2023

Installing the Cosmostreamer firmware

  1. Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
  2. Download ZIP-archive with firmware content
  3. Extract .img file from downloaded ZIP archive
  4. Use Win32DiskImager on Windows or Balena Etcher on Mac and write .img file on microSD card
  5. Insert the microSD card into the Raspberry Pi
  6. If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI0- port (nearest to USB-C port)
  7. Plug a standard USB power supply or powerbank to the Raspberry Pi GPIO pins (see chapter "Raspberry Pi power"). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.


Power for Raspberry Pi

For using with DJI Goggles2/Integra Raspberry Pi 4 must be powered ONLY from GPIO or from PoE or via USB-C port with custom cable.

Power with GPIO (pins)

Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.

rpi-gpio-pwr.jpg

Power with USB-C port

Power with PoE