Cosmostreamer Wiki - User contributions [en]

Cosmostreamer for DJI Goggles3 USB-A/Wi-Fi connection

2026-09-30T17:15:24Z

Admin: Created page with "Need to add..."

Need to add...

Main Page

2026-09-30T17:15:06Z

Admin: /* DJI FPV Goggles */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
* [[Cosmostreamer for DJI Goggles3 USB-A/Wi-Fi connection]]
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC2/Pro2/Plus]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Pockes/Actions]]

 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Main Page

2026-09-30T17:14:37Z

Admin: /* DJI FPV Goggles */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC2/Pro2/Plus]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Pockes/Actions]]

 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Main Page

2026-09-30T17:14:14Z

Admin: /* DJI Drones */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC2/Pro2/Plus]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Pockes/Actions]]

 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Cosmostreamer for DJI Pockes/Actions

2026-09-30T16:44:23Z

Admin: Created page with "==Product page== ==Hardware== Cosmostreamer for DJI Pocket 3 can work on these boards: ===Raspberry Pi 4B=== Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb. * Two micro-HDMI outs * Analog video out (CVBS, TV-out) in 3.5 mini-jack * DSI display may be used. If DSI display connected - only HDMI-0 may be used. * Wi-Fi 2.4/5 GHz * Ethernet 10/100/1000 Mbit/s * 2 USB 2.0 ports + 2 USB 3.0 ports * 1 USB-C port (can be used as power input) ===Raspberry Pi 3B/3B+=== * HDMI..."

==Product page==
 

==Hardware==
Cosmostreamer for DJI Pocket 3 can work on these boards: 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (can be used as power input)
 

===Raspberry Pi 3B/3B+===
* HDMI port
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - HDMI can't be used.
* Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
* Ethernet 10/100/1000 Mbit/s
* 4 USB 2.0 ports
* 1 micro-USB port for power in
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot 
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==

===Power with standard Micro-USB or USB-C port===
USB-C port on Raspberry Pi 4, micro-USB port on Raspberry Pi 3 B/B+
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. In a browser open http://172.20.10.2
 

====From Android smartphone====
Similar to Iphone, but IP address is different for different smartphone models, so no common IP.
 

==Settings and controls==
<pre style="color:red">Video in browser may not work properly, need to switch photo/video mode</pre>

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
<pre style="color:red">Video in browser may not work properly, need to switch photo/video mode</pre>
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so need to change a "camera type" for using with DJI Pocket 3. 
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Pocket 3"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process.
 
#Buy license key on a [https://cosmostreamer.com/products/djipocket3/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Pocket 3 connection==

===Wi-Fi connection===
DJI Pocket 3 can be connected only using Wi-Fi. By default Cosmostreamer configured for using USB Wi-Fi for Pocket 3 connection.
#Turn on DJI Pocket 3
#Plug USB Wi-Fi dongle into Raspberry Pi.
#Open Cosmostreamer device settings, chapter "Info"
#Click "Search for camera" button
#Click in list on device with name like "OsmoPocket3-XXXX"
#Click "Save settings" button
#Then go to menu chapter "System" and click "Reboot box" button. Raspberry Pi will be rebooted.
 
<pre style="color:green">You can see a PIN on Pocket 3 display, click "Accept" button.</pre>
 
[https://cosmostreamer.com/products/pocket3/diy/img/pocket3-search.png https://cosmostreamer.com/products/pocket3/diy/img/pocket3-search-small.png] 
 
[https://cosmostreamer.com/products/pocket3/diy/img/pocket3-search2.png https://cosmostreamer.com/products/pocket3/diy/img/pocket3-search2-small.png] 
 

===Wi-Fi interface===
<pre style="color:red">You can lost Wi-Fi access to your Raspberry Pi! Better to use Ethernet connection when changing something in Wi-Fi devices settings.</pre>

If you want to use internal Wi-Fi for Pocket 3 connection, do these steps:
#Open Cosmostreamer device settings
#Go to chapter "Wi-Fi"
#Open tab "Camera"
#Choose "Internal Wi-Fi" in list
#If this interface is already busy for Access Point or WLAN connection - need to set "Disabled" in that lists.
#Don't fill the SSID and Password fields
#If no connection a long time - set Wi-Fi country to "CN" in the tab "Country".
 
https://cosmostreamer.com/products/pocket3/diy/img/pocket3-wifi-iface.png 
 

==Video in browser fix==
At current moment video from DJI Pocket 3 can not be shown in browser. Need to switch photo/video mode on Pocket 3 and after that video may be shown, but it is not stable.
It is possible to fix this problem.
#Open Cosmostreamer device settings
#Go to chapter "Video/Audio"
#Enable option "Transcoding enabled"
#Set Bitrate to any value, for example, 2500 kbit/s
#Click "Save" button
 
https://cosmostreamer.com/products/pocket3/diy/img/pocket3-transcoding2.png
 

==Downloads==
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

[[Category:Camera]] [[Category:Osmo]] [[Category:DJI]]

Main Page

2026-09-30T16:44:17Z

Admin: /* DJI Cameras */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC2/Pro2/Plus]]
* [[Cosmostreamer for DJI Go4 drones]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Pockes/Actions]]

 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Cosmostreamer for DJI RC2/Pro2/Plus

2026-09-24T16:40:57Z

Admin:

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro 2
* DJI RC Plus
 

==Supported Drones==
Any drone which work with DJI RC2, RC Pro 2, RC Plus controllers.
<pre style="color:red">No telemetry, control only!!! Video stream from the DJI RC2 controller is possible only via Wi-Fi, using the RTMP protocol.</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC2/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC2/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC2/Pro2/Plus

2026-09-24T16:39:57Z

Admin: /* Supported Drones */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro 2
* DJI RC Plus
 

==Supported Drones==
Any drone which work with DJI RC2, RC Pro 2, RC Plus controllers.
<pre style="color:red">No telemetry, control only!!! Video stream from the DJI RC2 controller is possible only via Wi-Fi, using the RTMP protocol.</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC2/Pro2/Plus

2026-09-24T16:39:29Z

Admin: /* Supported Drones */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro 2
* DJI RC Plus
 

==Supported Drones==
Any drone which work with DJI RC2, RC Pro 2, RC Plus controllers.
<pre style="color:red">No telemetry, control only!!! Video stream from the controller is possible only via Wi-Fi, using the RTMP protocol.</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC2/Pro2/Plus

2026-09-24T16:37:26Z

Admin: /* Supported Controllers */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro 2
* DJI RC Plus
 

==Supported Drones==
Any drone which work with DJI RC2, RC Pro 2, RC Plus controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC2/Pro2/Plus

2026-09-24T16:15:05Z

Admin: Created page with "==Product page== Not ready yet ==Demo video== Coming soon... ==Supported Controllers== * DJI RC2 * DJI RC Pro 2 * DJI RC Plus * DJI RC Plus 2 ==Supported Drones== Any drone which work with DJI RC2, RC Pro 2, RC Plus controllers. <pre style="color: red">No video, no telemetry, control only!!!</pre> Tested with: * DJI Mavic 4 Pro and DJI RC Pro 2 * DJI Matrice M300 and DJI RC Plus ==Hardware== Cosmostreamer for DJI RC Pro/Pro2/Plus can work..."

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, RC Pro 2, RC Plus controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Main Page

2026-09-24T16:14:35Z

Admin: /* DJI Drones */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC2/Pro2/Plus]]
* [[Cosmostreamer for DJI Go4 drones]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Pocket 3]]
 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Main Page

2026-08-29T11:53:58Z

Admin: /* DJI Cameras */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC Pro/Pro2/Plus]]
* [[Cosmostreamer for DJI Go4 drones]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Pocket 3]]
 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Main Page

2026-08-29T11:53:47Z

Admin: /* DJI Gimbals */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC Pro/Pro2/Plus]]
* [[Cosmostreamer for DJI Go4 drones]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Osmo/Osmo+/Osmo Pro/Osmo RAW]]
* [[Cosmostreamer for DJI Pocket Osmo/Pocket2]]
* [[Cosmostreamer for DJI Pocket 3]]
 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Cosmostreamer for DJI SDR with DJI gimbals

2026-08-29T11:53:33Z

Admin: /* Firmware update */

==Product page==
[https://cosmostreamer.com/products/djisdr/ https://cosmostreamer.com/products/djisdr/]
 

==Video reviews==
No reviewes yet.
 

==Supported Gimbals==
All DJI gimbals which officially supported by DJI SDR. Tested with DJI RS4 and DJI RS4 Pro.
 

==Hardware==
Cosmostreamer for DJI SDR can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI SDR connection)
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

===Raspberry Pi Zero/ZeroW===
<pre style="color: red">Not supported due too slow single-core CPU</pre>
 

===Raspberry Pi Zero2W===
<pre style="color: red">Not tested but should work</pre>
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when DJI SDR is connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using Raspberry Pi 4 with DJI SDR it must be powered via GPIO or from PoE.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 

===Power with PoE===
Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat] or [https://www.raspberrypi.com/products/poe-plus-hat/ PoE+ Hat] 
[https://cosmostreamer.com/img/poeplushat.jpg https://cosmostreamer.com/img/poeplushat.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so need to change it to type #31 "DJI SDR":
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI SDR (type #31)"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djisdr/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI SDR RX connection==
 

===Standard USB-C to USB-C cable===
<pre style="color: red">Not supported!</pre>

===Custom USB-C to USB-C cable===
Need to use a standard USB-C to USB-C cable, but with the power wire(s) cut inside the cable.
<pre style="color: red">Red wire (5V) must be cut for using with the DJI SDR RX</pre>
 
[https://cosmostreamer.com/img/usb-c-custom-cable.png https://cosmostreamer.com/img/usb-c-custom-cable.png] 
 
One side - to the Raspberry Pi 4 USB-C port. Another side - into DJI SDR RX (receiver unit) "Firmware Update and Video Output Port".
 
[https://cosmostreamer.com/img/djisdr-rpi4-usb-connection.jpg https://cosmostreamer.com/img/djisdr-rpi4-usb-connection.jpg] 

 

==DJI SDR TX connection==
 

===Without or with only one focus motor===
This is an official DJI connection scheme. Use the camera control cable (USB-C 30cm or any other USB-C to USB-C cable) to connect the video transmission/LiDAR range finder port on the gimbal to the USB-C power and gimbal communication port on the DJI SDR TX (transmitter). This setup allows the gimbal to power the transmitter. 

If you want to use a focus motor - use another USB-C to USB-C cable and connect it to the "In" USB-C port on the motor and to the "Focus Motor Port (USB-C)" on the gimbal. 

Motor can be ONLY in "Focus" mode to be possible to control it from Cosmostreamer!
 
[https://cosmostreamer.com/img/djisdr-tx-rs4.jpg https://cosmostreamer.com/img/djisdr-tx-rs4.jpg] 

[https://cosmostreamer.com/img/djisdr-rs4-one-motor.jpg https://cosmostreamer.com/img/djisdr-rs4-one-motor-small.jpg] 

 

===With two motors===
<pre style="color:green">Two motors officially supported only by DJI RS4 Pro. But with a connection trick RS4 (not Pro) also works with the two motors perfectly.</pre>
To control two motors (e.g., focus and zoom, or focus and IRIS), a special connection trick is required. 

Firtst motor - as usual, connect to the "Focus Motor Port (USB-C)" on the gimbal. This motor can be ONLY in "Focus" mode! 

Connect a second motor's "In" USB-C port to the video transmission/LiDAR range finder port on the gimbal. Then connect this motor's "Out" USB-C port to the gimbal communication port on the DJI SDR TX (transmitter). I.e. DJI SDR TX will be connected only to the this motor. This motor can be in any mode (Focus, Zoom, IRIS) 
 

[https://cosmostreamer.com/img/dsjisdr-rs4-2motors-scheme.jpg https://cosmostreamer.com/img/dsjisdr-rs4-2motors-scheme.jpg] 
 
[https://cosmostreamer.com/img/djisdr-rs4-two-motors.jpg https://cosmostreamer.com/img/djisdr-rs4-two-motors-small.jpg] 

 

===With three motors===
<pre style="color:green">Three motors officially supported only by DJI RS4 Pro. But with a connection trick RS4 (not Pro) also should work with the three motors.</pre>
To control three motors (e.g., focus, zoom and IRIS), a special connection trick is required. 

First motor - as usual, connect to the "Focus Motor Port (USB-C)" on the gimbal. This motor can be ONLY in "Focus" mode! 

Connect a second motor's "In" USB-C port to the video transmission/LiDAR range finder port on the gimbal. Then connect this motor's "Out" USB-C port to the third motor's "In" USB-C port. And "Out" USB-C port on this motor - to gimbal communication port on the DJI SDR TX (transmitter). These motors can be in any mode (Focus, Zoom, IRIS) 
 

[https://cosmostreamer.com/img/dsjisdr-rs4-3motors-scheme.jpg https://cosmostreamer.com/img/dsjisdr-rs4-3motors-scheme.jpg] 
 
[https://cosmostreamer.com/img/djisdr-rs4-three-motors.jpg https://cosmostreamer.com/img/djisdr-rs4-three-motors-small.jpg] 
<pre style="color:green">Focus motor is not shown on this photo</pre>

 

==CosmoJoy==
A tiny device that allows PWM signal output for servo control through DJI SDR. Also it can work as a HID gamepad, that's why it called "CosmoJoy" :-) 

Demo: [https://www.instagram.com/p/DTYJS4TjOcD/ https://www.instagram.com/p/DTYJS4TjOcD/]
 

===Hardware===
1. Seeed Studio XIAO RP2350 
[https://www.seeedstudio.com/Seeed-XIAO-RP2350-p-5944.html https://www.seeedstudio.com/Seeed-XIAO-RP2350-p-5944.html]

2. CAN Bus Breakout Board for Seeed Studio XIAO 
[https://www.seeedstudio.com/Seeed-Studio-CAN-Bus-Breakout-Board-for-XIAO-and-QT-Py-p-5702.html https://www.seeedstudio.com/Seeed-Studio-CAN-Bus-Breakout-Board-for-XIAO-and-QT-Py-p-5702.html]
 

===XIAO RP2350 Pinout===
[[File:Xiao-rp2350-pinout.png|800px]]

 

===Assembly===
Just insert XIAO RP2350 into the CAN Bus Breakout Board and add 120 OHm resistor between CAN HI and LO contacts. 
[[File:Cosmojoy-1.jpg|800px]]
 

===Firmware upload===
[[File:Cosmojoy-5.jpg|800px]]
 
1. Insert USB-C cable to the XIAO RP2350 board 
2. Press and hold button "B" on the board 
3. Connect USB cable to the PC. 
4. Release button "B". 
5. Board should be detected as USB drive in Windows or Mac OS. 
6. Download firmware file [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmojoy/CosmoJoyRP2350.ino.uf2 here] 
7. Copy this firmware file on the detected USB drive. Board will auto reset after this. 
8. Done! 
 

===LED indication===
State colors: 
1. Setup stage - Orange LED will blink once after power on and stay solid. 
2. When DJI SDR TX plugged and powered on - red LED on the CAN board will blink. 
3. When commands from Cosmostreamer coming to the CosmoJoy - orange LED will blink. 
 

===Connection to the DJI SDR TX===
Use any standard USB cable and cut it on one side. Then connect USB-C connector to the port on the DJI SDR TX. And wires on another side connect to the CAN Bus Breakout Board. Green - to the CAN HI, White - to the CAN Lo.
 
[[File:Cosmojoy-3.jpg|800px]] 
[[File:Cosmojoy-4.jpg|800px]] 

If you want to use CosmoJoy together with DJI RS4/RS5 - use parallel connection, at the same time to the RS4/RS5 and to the CosmoJoy. 

====Using as a HID gamepad====
Just plug the USB-C port on the XIAO board into a USB port on your PC. Power for the CosmoJoy will go from the USB port. 
The device should be detected as a gamepad with the name "CosmoJoy" (Vendor: 239a Product: cafe), but only after pressing any button or moving any axis. 

Assign a channels functions like this (just for example): 
[[File:Cosmojoy-2.jpg|800px]]
 

Demo: [https://www.instagram.com/reel/DZYnG3Tsit9/?igsh=MWV6Z3pwamV5N3I5cQ== https://www.instagram.com/reel/DZYnG3Tsit9/?igsh=MWV6Z3pwamV5N3I5cQ==]
 
Gamepad tester online (works not in all browsers, better to use Chrome) [https://gamepad-tester.net/ https://gamepad-tester.net/]
 

====Using as PWM source====
Need to put 5V power to the CosmoJoy. This can be via USB-C port (just connect to the power supply, powerbank, or any 5V source). And also this can be via pins "5V" and "Gnd" (look at the "XIAO RP2350 Pinout" image above). 
 
Demo: [https://www.instagram.com/reel/DZYw-u9Iw3T/?igsh=MWJmMXMxNWc5cHp3eg== https://www.instagram.com/reel/DZYw-u9Iw3T/?igsh=MWJmMXMxNWc5cHp3eg==] 
 
Pinout: 
5V - input power 5 Volts 
Gnd - input power Ground 
D0 - PWM Out 1 (RC function SDR Aux1) 
D1 - PWM Out 2 (RC function SDR Aux2) 
D2 - PWM Out 3 (RC function SDR Aux3) 
D4 - PWM Out 4 (RC function SDR Aux4) 
D5 - PWM Out 5 (RC function SDR Aux5) 
 

====Using as CRSF TX====
Pinout: 
5V - input power 5 Volts 
Gnd - input power Ground 
D6 - CRSF output (TX). Connect it to the UART port (RX pin) on your device.
 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[https://dl.djicdn.com/downloads/DJI_SDR_Transmission/20240717/UG2/DJI__SDR_Transmission_User_Guide_v1.0_EN.pdf Official DJI SDR User Guide]
*[https://dl.djicdn.com/downloads/DJI_RS_4/UM20240408/DJI_RS_4_User_Manual_v1.0_en.pdf Official DJI RS4/RS4 Pro User Manual]
*[https://dl.djicdn.com/downloads/DJI_Focus_Pro/DJI_Focus_Pro_User_Manual_en.pdf DJI Focus Pro User Manual]
 

==Demos==
[https://www.instagram.com/p/DKvd7r-oaQf/ https://www.instagram.com/p/DKvd7r-oaQf/] 
[https://www.instagram.com/p/DKW0a3IIcke/ https://www.instagram.com/p/DKW0a3IIcke/] 
[https://www.instagram.com/p/DKSWTNbonjl/ https://www.instagram.com/p/DKSWTNbonjl/] 
[https://www.instagram.com/p/DKKlLjUIEgV/ https://www.instagram.com/p/DKKlLjUIEgV/] 
[https://www.instagram.com/p/DBqXTcxuLgJ/ https://www.instagram.com/p/DBqXTcxuLgJ/] 
 

==FAQ==
 

===What gimbals are supported?===
All DJI gimbals which are officially supported buy DJI SDR should work. Tested with DJI RS4 and DJI RS4 Pro.
 

===Can I control a focus motor?===
Yes. With a standard USB cables connection from DJI focus motor to RS4 or another DJI Gimbal focus motor works fine.
 

===Can I control additional motors (zoom, IRIS)?===
Yes, but need to use a non-standard connection scheme. Read here please: [[#With_two_motors]]

Cosmostreamer for DJI Pocket 3

2026-08-29T11:53:21Z

Admin: /* Firmware update */

Cosmostreamer for DJI Go4 drones

2026-08-29T11:53:06Z

Admin: /* Firmware update */

==Product page==
[http://cosmostreamer.com/products/djigo4drones/ http://cosmostreamer.com/products/djigo4drones/]
 

==Demo video==
<youtube>19KdR245MnM</youtube>
 

==Supported Drones==
Any drone which work with DJI Go4 application.

* DJI Phantom 4 Pro V2.0
* DJI Mavic Pro
* DJI Macic 2 Pro
* DJI Mavic 2
* DJI Inspire 2
 

==Hardware==
Cosmostreamer for DJI Go4 drones can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs, both can be used for video output
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - video output available only on this display + HDMI-0 port.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for drone controller connection)
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Go4 drones controllers Raspberry Pi 4 must be powered ONLY from GPIO or from PoE or via USB-C port with custom cable.
 

===Power with GPIO (pins)===
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank. 
[https://cosmostreamer.com/img/rpi-gpio-pwr.jpg https://cosmostreamer.com/img/rpi-gpio-pwr.jpg]
 

===Power with USB-C port===
USB-C port on Raspberry Pi 4 is busy by DJI drone controller connection, so need to made a custom USB cable with additional part for power. 
[https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-with-power-cable-rcn1.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-with-power-cable-rcn1.jpg] 
[https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-power-cable-scheme-rcn1.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-power-cable-scheme-rcn1-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. In a browser open http://172.20.10.2
 

====From Android smartphone====
Similar to Iphone, but IP address is different for different smartphone models, so no common IP.
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Go4 drones"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djigo4drones/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Cosmostreamer may be connected to DJI drone controller only with USB. Use USB-C port on Raspberry Pi4 and USB port which is usually used for smartphone connection.
 

==Smartphone connection==
Just connect any Android smartphone to any of four USB-A ports on Raspberry Pi. DJI Go4 application will be auto started.
 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-29T11:52:52Z

Admin: /* Firmware update */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Fly drones

2026-08-29T11:52:26Z

Admin: /* Firmware update */

==Product page==
[http://cosmostreamer.com/products/djiflydrones/ http://cosmostreamer.com/products/djiflydrones/]
 

==Demo video==
<youtube>zNy2B2myD4I</youtube>
 

==Supported Drones==
Any drone which work with DJI Fly application and DJI RC-N1, RC-N2 or DJI RC-N3 controller.
<pre style="color: red">DJI RC, DJI RC2, DJI RC Pro, DJI RC Pro2 are not supported!</pre>

* DJI Mini 2
* DJI Mini 3
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Mini 5 Pro
* DJI Mavic 3
* DJI Mavic 3 Classic
* DJI Mavic 3 Pro
* DJI Air 2s
* DJI Mavic Air 2
* DJI Air 3s
* DJI Air 3
* DJI Neo
* DJI Neo 2
* DJI Flip
* DJI Avata 360
* DJI LITO X1
* DJI LITO
 

==Hardware==
Cosmostreamer for DJI Fly drones can work ONLY on this board: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI ports
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - video output only on this display.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI RC-N1/RC-N2/RC-N3 connection)
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
 

==Common connections scheme==
[[File:Djifly-connections-2.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI RC-Nx controllers Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 

===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

===Power with USB-C port===
<pre style="color: red">Bad way! Use it only if you know what you doing.</pre>

USB-C port on Raspberry Pi 4 is busy by DJI RC-N1/RC-N2/RC-N3 connection, so need to made a custom USB cable with additional part for power. 
[https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-with-power-cable-rcn1.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-with-power-cable-rcn1.jpg] 
[https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-power-cable-scheme-rcn1.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/usb-c-power-cable-scheme-rcn1-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #22 - "DJI RC-N1,RC-N2,RC-N3" (It was "DJI Fly" in the old firmware versions)
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djiflydrones/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI RC-N1, RC-N2 and RC-N3 connection==
<pre style="color: red">DJI RC and DJI RC2 are not supported!</pre>
Use any USB-C to USB-C cable and plug one side to Raspberry Pi USB-C port, second side - to USB-C port on DJI RC-N1/RC-N2/RC-N3. The same USB-C which is used for smartphone connection. 
 
[https://cosmostreamer.com/products/djiflydrones/diy/img/rcn1-usb.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/rcn1-usb-small.jpg]
 

==Smartphone connection==
You can connect any Android smartphone or tablet to Raspberry Pi and use DJI Fly app as usual. 
Just plug USB cable from Android smartphone to any of USB ports on Raspberry Pi. 

<pre style="color:red">IOS devices (Iphone, Ipad) is not supported yet!</pre>

Android smartphone with DJI Fly can be connected to any of three USB-A ports, excluding marked as X on the image! This USB port is reserved for Android smartphone in USB modem mode. 
 

[[File:Device-settings-chapter-streaming-bridge.png|600px]]

 
[https://cosmostreamer.com/products/djiflydrones/diy/img/djiflydrones-djiflyapp.jpg https://cosmostreamer.com/products/djiflydrones/diy/img/djiflydrones-djiflyapp-small.jpg]
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI FPV Goggles V1/V2

2026-08-29T11:52:00Z

Admin: /* Firmware update */

==Product page==
[https://cosmostreamer.com/products/djifpvgoggles/ https://cosmostreamer.com/products/djifpvgoggles/]
 

==Supported Goggles==
*DJI FPV Goggles V1 (max output resolution 720@60p)
*DJI FPV Goggles V2 (max output resolution 810@60p)

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata

==Hardware==
Cosmostreamer for DJI FPV Goggles V1/V2 can work on these boards: 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (can be used as power input)
 

===Raspberry Pi 3B/3B+===
* HDMI port
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - HDMI can't be used.
* Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
* Ethernet 10/100/1000 Mbit/s
* 4 USB 2.0 ports
* 1 micro-USB port for power in
 

===Raspberry Pi Zero/ZeroW===
<pre style="color: red">Not supported due slow CPU</pre>
 

===Raspberry Pi Zero2W===
<pre style="color: red">Not recommended</pre>
* Mini-HDMI port
* Wi-Fi 2.4GHz
* Network features may be limited due the low speed Wi-Fi
* Micro-USB port for power in
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot 
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==

===Power with standard Micro-USB or USB-C port===
USB-C port on Raspberry Pi 4, micro-USB port on Raspberry Pi 3 B/B+/Zero/ZeroW/Zero2W
 

===Power with GPIO (pins)===
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
 
[https://cosmostreamer.com/img/rpi-gpio-pwr.jpg https://cosmostreamer.com/img/rpi-gpio-pwr.jpg]

===Power with PoE===
Only for Raspberry Pi 4B and 3B+. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat].
 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so need to change a "camera type" for using with DJI Goggles V1/V2. 
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI FPV Goggles V1/V2"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process.
 
#Buy license key on a [https://cosmostreamer.com/products/djifpvgoggles/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI FPV Goggles V1/V2 connection==
Use any standard USB-C cable and plug it into any of four USB-A ports on Raspberry Pi. 
[https://cosmostreamer.com/products/djifpvgoggles/diy/img/djifpvgoggles-rpi.jpg https://cosmostreamer.com/products/djifpvgoggles/diy/img/djifpvgoggles-rpi-small.jpg]
 

==Collaboration with DJI Goggles2/Integra==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/Integra, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/Integra" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/Integra" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/Integra and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/Integra" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
#Go to chapter "Info"
#Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles2/Integra"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/v2_g2_cooperative_mode2.png http://cosmostreamer.com/img/v2_g2_cooperative_mode2.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.

<pre style="color:green;">For Raspberry Pi4: HDMI mode setting is available only for HDMI-0 port!</pre>

#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Which goggles version is supported?===
DJI FPV Goggles V1 and V2

===Does it works with DJI Goggles2 or Integra?===
No, need to use another camera type "DJI Goggles2/Integra" ([https://cosmostreamer.com/products/djigoggles2/ product page]) with another license key

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-29T11:51:31Z

Admin: /* Firmware update */

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: please don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-29T11:51:02Z

Admin: /* Firmware update */

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System" 
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
<pre style="color: red">For the Mac OS users: don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>
3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button 
4. Raspberry Pi must goes to reboot automatically after update installed 
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-29T11:50:45Z

Admin: /* Firmware update */

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

1. Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
2. Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
<pre style="color: red">For the Mac OS users: don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>

3. Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
4. Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-29T11:50:20Z

Admin: /* Firmware update */

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
<pre style="color: red">For the Mac OS users: don't use Safari for file downloading! Any browser (Chrome, Mozilla, etc), but not Safari!!!</pre>

#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI SDR with DJI gimbals

2026-08-28T20:23:25Z

Admin: /* From Android smartphone */

==Product page==
[https://cosmostreamer.com/products/djisdr/ https://cosmostreamer.com/products/djisdr/]
 

==Video reviews==
No reviewes yet.
 

==Supported Gimbals==
All DJI gimbals which officially supported by DJI SDR. Tested with DJI RS4 and DJI RS4 Pro.
 

==Hardware==
Cosmostreamer for DJI SDR can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI SDR connection)
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

===Raspberry Pi Zero/ZeroW===
<pre style="color: red">Not supported due too slow single-core CPU</pre>
 

===Raspberry Pi Zero2W===
<pre style="color: red">Not tested but should work</pre>
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when DJI SDR is connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using Raspberry Pi 4 with DJI SDR it must be powered via GPIO or from PoE.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 

===Power with PoE===
Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat] or [https://www.raspberrypi.com/products/poe-plus-hat/ PoE+ Hat] 
[https://cosmostreamer.com/img/poeplushat.jpg https://cosmostreamer.com/img/poeplushat.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so need to change it to type #31 "DJI SDR":
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI SDR (type #31)"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djisdr/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI SDR RX connection==
 

===Standard USB-C to USB-C cable===
<pre style="color: red">Not supported!</pre>

===Custom USB-C to USB-C cable===
Need to use a standard USB-C to USB-C cable, but with the power wire(s) cut inside the cable.
<pre style="color: red">Red wire (5V) must be cut for using with the DJI SDR RX</pre>
 
[https://cosmostreamer.com/img/usb-c-custom-cable.png https://cosmostreamer.com/img/usb-c-custom-cable.png] 
 
One side - to the Raspberry Pi 4 USB-C port. Another side - into DJI SDR RX (receiver unit) "Firmware Update and Video Output Port".
 
[https://cosmostreamer.com/img/djisdr-rpi4-usb-connection.jpg https://cosmostreamer.com/img/djisdr-rpi4-usb-connection.jpg] 

 

==DJI SDR TX connection==
 

===Without or with only one focus motor===
This is an official DJI connection scheme. Use the camera control cable (USB-C 30cm or any other USB-C to USB-C cable) to connect the video transmission/LiDAR range finder port on the gimbal to the USB-C power and gimbal communication port on the DJI SDR TX (transmitter). This setup allows the gimbal to power the transmitter. 

If you want to use a focus motor - use another USB-C to USB-C cable and connect it to the "In" USB-C port on the motor and to the "Focus Motor Port (USB-C)" on the gimbal. 

Motor can be ONLY in "Focus" mode to be possible to control it from Cosmostreamer!
 
[https://cosmostreamer.com/img/djisdr-tx-rs4.jpg https://cosmostreamer.com/img/djisdr-tx-rs4.jpg] 

[https://cosmostreamer.com/img/djisdr-rs4-one-motor.jpg https://cosmostreamer.com/img/djisdr-rs4-one-motor-small.jpg] 

 

===With two motors===
<pre style="color:green">Two motors officially supported only by DJI RS4 Pro. But with a connection trick RS4 (not Pro) also works with the two motors perfectly.</pre>
To control two motors (e.g., focus and zoom, or focus and IRIS), a special connection trick is required. 

Firtst motor - as usual, connect to the "Focus Motor Port (USB-C)" on the gimbal. This motor can be ONLY in "Focus" mode! 

Connect a second motor's "In" USB-C port to the video transmission/LiDAR range finder port on the gimbal. Then connect this motor's "Out" USB-C port to the gimbal communication port on the DJI SDR TX (transmitter). I.e. DJI SDR TX will be connected only to the this motor. This motor can be in any mode (Focus, Zoom, IRIS) 
 

[https://cosmostreamer.com/img/dsjisdr-rs4-2motors-scheme.jpg https://cosmostreamer.com/img/dsjisdr-rs4-2motors-scheme.jpg] 
 
[https://cosmostreamer.com/img/djisdr-rs4-two-motors.jpg https://cosmostreamer.com/img/djisdr-rs4-two-motors-small.jpg] 

 

===With three motors===
<pre style="color:green">Three motors officially supported only by DJI RS4 Pro. But with a connection trick RS4 (not Pro) also should work with the three motors.</pre>
To control three motors (e.g., focus, zoom and IRIS), a special connection trick is required. 

First motor - as usual, connect to the "Focus Motor Port (USB-C)" on the gimbal. This motor can be ONLY in "Focus" mode! 

Connect a second motor's "In" USB-C port to the video transmission/LiDAR range finder port on the gimbal. Then connect this motor's "Out" USB-C port to the third motor's "In" USB-C port. And "Out" USB-C port on this motor - to gimbal communication port on the DJI SDR TX (transmitter). These motors can be in any mode (Focus, Zoom, IRIS) 
 

[https://cosmostreamer.com/img/dsjisdr-rs4-3motors-scheme.jpg https://cosmostreamer.com/img/dsjisdr-rs4-3motors-scheme.jpg] 
 
[https://cosmostreamer.com/img/djisdr-rs4-three-motors.jpg https://cosmostreamer.com/img/djisdr-rs4-three-motors-small.jpg] 
<pre style="color:green">Focus motor is not shown on this photo</pre>

 

==CosmoJoy==
A tiny device that allows PWM signal output for servo control through DJI SDR. Also it can work as a HID gamepad, that's why it called "CosmoJoy" :-) 

Demo: [https://www.instagram.com/p/DTYJS4TjOcD/ https://www.instagram.com/p/DTYJS4TjOcD/]
 

===Hardware===
1. Seeed Studio XIAO RP2350 
[https://www.seeedstudio.com/Seeed-XIAO-RP2350-p-5944.html https://www.seeedstudio.com/Seeed-XIAO-RP2350-p-5944.html]

2. CAN Bus Breakout Board for Seeed Studio XIAO 
[https://www.seeedstudio.com/Seeed-Studio-CAN-Bus-Breakout-Board-for-XIAO-and-QT-Py-p-5702.html https://www.seeedstudio.com/Seeed-Studio-CAN-Bus-Breakout-Board-for-XIAO-and-QT-Py-p-5702.html]
 

===XIAO RP2350 Pinout===
[[File:Xiao-rp2350-pinout.png|800px]]

 

===Assembly===
Just insert XIAO RP2350 into the CAN Bus Breakout Board and add 120 OHm resistor between CAN HI and LO contacts. 
[[File:Cosmojoy-1.jpg|800px]]
 

===Firmware upload===
[[File:Cosmojoy-5.jpg|800px]]
 
1. Insert USB-C cable to the XIAO RP2350 board 
2. Press and hold button "B" on the board 
3. Connect USB cable to the PC. 
4. Release button "B". 
5. Board should be detected as USB drive in Windows or Mac OS. 
6. Download firmware file [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmojoy/CosmoJoyRP2350.ino.uf2 here] 
7. Copy this firmware file on the detected USB drive. Board will auto reset after this. 
8. Done! 
 

===LED indication===
State colors: 
1. Setup stage - Orange LED will blink once after power on and stay solid. 
2. When DJI SDR TX plugged and powered on - red LED on the CAN board will blink. 
3. When commands from Cosmostreamer coming to the CosmoJoy - orange LED will blink. 
 

===Connection to the DJI SDR TX===
Use any standard USB cable and cut it on one side. Then connect USB-C connector to the port on the DJI SDR TX. And wires on another side connect to the CAN Bus Breakout Board. Green - to the CAN HI, White - to the CAN Lo.
 
[[File:Cosmojoy-3.jpg|800px]] 
[[File:Cosmojoy-4.jpg|800px]] 

If you want to use CosmoJoy together with DJI RS4/RS5 - use parallel connection, at the same time to the RS4/RS5 and to the CosmoJoy. 

====Using as a HID gamepad====
Just plug the USB-C port on the XIAO board into a USB port on your PC. Power for the CosmoJoy will go from the USB port. 
The device should be detected as a gamepad with the name "CosmoJoy" (Vendor: 239a Product: cafe), but only after pressing any button or moving any axis. 

Assign a channels functions like this (just for example): 
[[File:Cosmojoy-2.jpg|800px]]
 

Demo: [https://www.instagram.com/reel/DZYnG3Tsit9/?igsh=MWV6Z3pwamV5N3I5cQ== https://www.instagram.com/reel/DZYnG3Tsit9/?igsh=MWV6Z3pwamV5N3I5cQ==]
 
Gamepad tester online (works not in all browsers, better to use Chrome) [https://gamepad-tester.net/ https://gamepad-tester.net/]
 

====Using as PWM source====
Need to put 5V power to the CosmoJoy. This can be via USB-C port (just connect to the power supply, powerbank, or any 5V source). And also this can be via pins "5V" and "Gnd" (look at the "XIAO RP2350 Pinout" image above). 
 
Demo: [https://www.instagram.com/reel/DZYw-u9Iw3T/?igsh=MWJmMXMxNWc5cHp3eg== https://www.instagram.com/reel/DZYw-u9Iw3T/?igsh=MWJmMXMxNWc5cHp3eg==] 
 
Pinout: 
5V - input power 5 Volts 
Gnd - input power Ground 
D0 - PWM Out 1 (RC function SDR Aux1) 
D1 - PWM Out 2 (RC function SDR Aux2) 
D2 - PWM Out 3 (RC function SDR Aux3) 
D4 - PWM Out 4 (RC function SDR Aux4) 
D5 - PWM Out 5 (RC function SDR Aux5) 
 

====Using as CRSF TX====
Pinout: 
5V - input power 5 Volts 
Gnd - input power Ground 
D6 - CRSF output (TX). Connect it to the UART port (RX pin) on your device.
 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[https://dl.djicdn.com/downloads/DJI_SDR_Transmission/20240717/UG2/DJI__SDR_Transmission_User_Guide_v1.0_EN.pdf Official DJI SDR User Guide]
*[https://dl.djicdn.com/downloads/DJI_RS_4/UM20240408/DJI_RS_4_User_Manual_v1.0_en.pdf Official DJI RS4/RS4 Pro User Manual]
*[https://dl.djicdn.com/downloads/DJI_Focus_Pro/DJI_Focus_Pro_User_Manual_en.pdf DJI Focus Pro User Manual]
 

==Demos==
[https://www.instagram.com/p/DKvd7r-oaQf/ https://www.instagram.com/p/DKvd7r-oaQf/] 
[https://www.instagram.com/p/DKW0a3IIcke/ https://www.instagram.com/p/DKW0a3IIcke/] 
[https://www.instagram.com/p/DKSWTNbonjl/ https://www.instagram.com/p/DKSWTNbonjl/] 
[https://www.instagram.com/p/DKKlLjUIEgV/ https://www.instagram.com/p/DKKlLjUIEgV/] 
[https://www.instagram.com/p/DBqXTcxuLgJ/ https://www.instagram.com/p/DBqXTcxuLgJ/] 
 

==FAQ==
 

===What gimbals are supported?===
All DJI gimbals which are officially supported buy DJI SDR should work. Tested with DJI RS4 and DJI RS4 Pro.
 

===Can I control a focus motor?===
Yes. With a standard USB cables connection from DJI focus motor to RS4 or another DJI Gimbal focus motor works fine.
 

===Can I control additional motors (zoom, IRIS)?===
Yes, but need to use a non-standard connection scheme. Read here please: [[#With_two_motors]]

Cosmostreamer for DJI SDR with DJI gimbals

2026-08-28T20:23:13Z

Admin: /* From Iphone */

==Product page==
[https://cosmostreamer.com/products/djisdr/ https://cosmostreamer.com/products/djisdr/]
 

==Video reviews==
No reviewes yet.
 

==Supported Gimbals==
All DJI gimbals which officially supported by DJI SDR. Tested with DJI RS4 and DJI RS4 Pro.
 

==Hardware==
Cosmostreamer for DJI SDR can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI SDR connection)
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

===Raspberry Pi Zero/ZeroW===
<pre style="color: red">Not supported due too slow single-core CPU</pre>
 

===Raspberry Pi Zero2W===
<pre style="color: red">Not tested but should work</pre>
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when DJI SDR is connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using Raspberry Pi 4 with DJI SDR it must be powered via GPIO or from PoE.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 

===Power with PoE===
Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat] or [https://www.raspberrypi.com/products/poe-plus-hat/ PoE+ Hat] 
[https://cosmostreamer.com/img/poeplushat.jpg https://cosmostreamer.com/img/poeplushat.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
Similar to Iphone, but IP address is different for different smartphone models, so no common IP.
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so need to change it to type #31 "DJI SDR":
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI SDR (type #31)"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djisdr/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI SDR RX connection==
 

===Standard USB-C to USB-C cable===
<pre style="color: red">Not supported!</pre>

===Custom USB-C to USB-C cable===
Need to use a standard USB-C to USB-C cable, but with the power wire(s) cut inside the cable.
<pre style="color: red">Red wire (5V) must be cut for using with the DJI SDR RX</pre>
 
[https://cosmostreamer.com/img/usb-c-custom-cable.png https://cosmostreamer.com/img/usb-c-custom-cable.png] 
 
One side - to the Raspberry Pi 4 USB-C port. Another side - into DJI SDR RX (receiver unit) "Firmware Update and Video Output Port".
 
[https://cosmostreamer.com/img/djisdr-rpi4-usb-connection.jpg https://cosmostreamer.com/img/djisdr-rpi4-usb-connection.jpg] 

 

==DJI SDR TX connection==
 

===Without or with only one focus motor===
This is an official DJI connection scheme. Use the camera control cable (USB-C 30cm or any other USB-C to USB-C cable) to connect the video transmission/LiDAR range finder port on the gimbal to the USB-C power and gimbal communication port on the DJI SDR TX (transmitter). This setup allows the gimbal to power the transmitter. 

If you want to use a focus motor - use another USB-C to USB-C cable and connect it to the "In" USB-C port on the motor and to the "Focus Motor Port (USB-C)" on the gimbal. 

Motor can be ONLY in "Focus" mode to be possible to control it from Cosmostreamer!
 
[https://cosmostreamer.com/img/djisdr-tx-rs4.jpg https://cosmostreamer.com/img/djisdr-tx-rs4.jpg] 

[https://cosmostreamer.com/img/djisdr-rs4-one-motor.jpg https://cosmostreamer.com/img/djisdr-rs4-one-motor-small.jpg] 

 

===With two motors===
<pre style="color:green">Two motors officially supported only by DJI RS4 Pro. But with a connection trick RS4 (not Pro) also works with the two motors perfectly.</pre>
To control two motors (e.g., focus and zoom, or focus and IRIS), a special connection trick is required. 

Firtst motor - as usual, connect to the "Focus Motor Port (USB-C)" on the gimbal. This motor can be ONLY in "Focus" mode! 

Connect a second motor's "In" USB-C port to the video transmission/LiDAR range finder port on the gimbal. Then connect this motor's "Out" USB-C port to the gimbal communication port on the DJI SDR TX (transmitter). I.e. DJI SDR TX will be connected only to the this motor. This motor can be in any mode (Focus, Zoom, IRIS) 
 

[https://cosmostreamer.com/img/dsjisdr-rs4-2motors-scheme.jpg https://cosmostreamer.com/img/dsjisdr-rs4-2motors-scheme.jpg] 
 
[https://cosmostreamer.com/img/djisdr-rs4-two-motors.jpg https://cosmostreamer.com/img/djisdr-rs4-two-motors-small.jpg] 

 

===With three motors===
<pre style="color:green">Three motors officially supported only by DJI RS4 Pro. But with a connection trick RS4 (not Pro) also should work with the three motors.</pre>
To control three motors (e.g., focus, zoom and IRIS), a special connection trick is required. 

First motor - as usual, connect to the "Focus Motor Port (USB-C)" on the gimbal. This motor can be ONLY in "Focus" mode! 

Connect a second motor's "In" USB-C port to the video transmission/LiDAR range finder port on the gimbal. Then connect this motor's "Out" USB-C port to the third motor's "In" USB-C port. And "Out" USB-C port on this motor - to gimbal communication port on the DJI SDR TX (transmitter). These motors can be in any mode (Focus, Zoom, IRIS) 
 

[https://cosmostreamer.com/img/dsjisdr-rs4-3motors-scheme.jpg https://cosmostreamer.com/img/dsjisdr-rs4-3motors-scheme.jpg] 
 
[https://cosmostreamer.com/img/djisdr-rs4-three-motors.jpg https://cosmostreamer.com/img/djisdr-rs4-three-motors-small.jpg] 
<pre style="color:green">Focus motor is not shown on this photo</pre>

 

==CosmoJoy==
A tiny device that allows PWM signal output for servo control through DJI SDR. Also it can work as a HID gamepad, that's why it called "CosmoJoy" :-) 

Demo: [https://www.instagram.com/p/DTYJS4TjOcD/ https://www.instagram.com/p/DTYJS4TjOcD/]
 

===Hardware===
1. Seeed Studio XIAO RP2350 
[https://www.seeedstudio.com/Seeed-XIAO-RP2350-p-5944.html https://www.seeedstudio.com/Seeed-XIAO-RP2350-p-5944.html]

2. CAN Bus Breakout Board for Seeed Studio XIAO 
[https://www.seeedstudio.com/Seeed-Studio-CAN-Bus-Breakout-Board-for-XIAO-and-QT-Py-p-5702.html https://www.seeedstudio.com/Seeed-Studio-CAN-Bus-Breakout-Board-for-XIAO-and-QT-Py-p-5702.html]
 

===XIAO RP2350 Pinout===
[[File:Xiao-rp2350-pinout.png|800px]]

 

===Assembly===
Just insert XIAO RP2350 into the CAN Bus Breakout Board and add 120 OHm resistor between CAN HI and LO contacts. 
[[File:Cosmojoy-1.jpg|800px]]
 

===Firmware upload===
[[File:Cosmojoy-5.jpg|800px]]
 
1. Insert USB-C cable to the XIAO RP2350 board 
2. Press and hold button "B" on the board 
3. Connect USB cable to the PC. 
4. Release button "B". 
5. Board should be detected as USB drive in Windows or Mac OS. 
6. Download firmware file [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmojoy/CosmoJoyRP2350.ino.uf2 here] 
7. Copy this firmware file on the detected USB drive. Board will auto reset after this. 
8. Done! 
 

===LED indication===
State colors: 
1. Setup stage - Orange LED will blink once after power on and stay solid. 
2. When DJI SDR TX plugged and powered on - red LED on the CAN board will blink. 
3. When commands from Cosmostreamer coming to the CosmoJoy - orange LED will blink. 
 

===Connection to the DJI SDR TX===
Use any standard USB cable and cut it on one side. Then connect USB-C connector to the port on the DJI SDR TX. And wires on another side connect to the CAN Bus Breakout Board. Green - to the CAN HI, White - to the CAN Lo.
 
[[File:Cosmojoy-3.jpg|800px]] 
[[File:Cosmojoy-4.jpg|800px]] 

If you want to use CosmoJoy together with DJI RS4/RS5 - use parallel connection, at the same time to the RS4/RS5 and to the CosmoJoy. 

====Using as a HID gamepad====
Just plug the USB-C port on the XIAO board into a USB port on your PC. Power for the CosmoJoy will go from the USB port. 
The device should be detected as a gamepad with the name "CosmoJoy" (Vendor: 239a Product: cafe), but only after pressing any button or moving any axis. 

Assign a channels functions like this (just for example): 
[[File:Cosmojoy-2.jpg|800px]]
 

Demo: [https://www.instagram.com/reel/DZYnG3Tsit9/?igsh=MWV6Z3pwamV5N3I5cQ== https://www.instagram.com/reel/DZYnG3Tsit9/?igsh=MWV6Z3pwamV5N3I5cQ==]
 
Gamepad tester online (works not in all browsers, better to use Chrome) [https://gamepad-tester.net/ https://gamepad-tester.net/]
 

====Using as PWM source====
Need to put 5V power to the CosmoJoy. This can be via USB-C port (just connect to the power supply, powerbank, or any 5V source). And also this can be via pins "5V" and "Gnd" (look at the "XIAO RP2350 Pinout" image above). 
 
Demo: [https://www.instagram.com/reel/DZYw-u9Iw3T/?igsh=MWJmMXMxNWc5cHp3eg== https://www.instagram.com/reel/DZYw-u9Iw3T/?igsh=MWJmMXMxNWc5cHp3eg==] 
 
Pinout: 
5V - input power 5 Volts 
Gnd - input power Ground 
D0 - PWM Out 1 (RC function SDR Aux1) 
D1 - PWM Out 2 (RC function SDR Aux2) 
D2 - PWM Out 3 (RC function SDR Aux3) 
D4 - PWM Out 4 (RC function SDR Aux4) 
D5 - PWM Out 5 (RC function SDR Aux5) 
 

====Using as CRSF TX====
Pinout: 
5V - input power 5 Volts 
Gnd - input power Ground 
D6 - CRSF output (TX). Connect it to the UART port (RX pin) on your device.
 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[https://dl.djicdn.com/downloads/DJI_SDR_Transmission/20240717/UG2/DJI__SDR_Transmission_User_Guide_v1.0_EN.pdf Official DJI SDR User Guide]
*[https://dl.djicdn.com/downloads/DJI_RS_4/UM20240408/DJI_RS_4_User_Manual_v1.0_en.pdf Official DJI RS4/RS4 Pro User Manual]
*[https://dl.djicdn.com/downloads/DJI_Focus_Pro/DJI_Focus_Pro_User_Manual_en.pdf DJI Focus Pro User Manual]
 

==Demos==
[https://www.instagram.com/p/DKvd7r-oaQf/ https://www.instagram.com/p/DKvd7r-oaQf/] 
[https://www.instagram.com/p/DKW0a3IIcke/ https://www.instagram.com/p/DKW0a3IIcke/] 
[https://www.instagram.com/p/DKSWTNbonjl/ https://www.instagram.com/p/DKSWTNbonjl/] 
[https://www.instagram.com/p/DKKlLjUIEgV/ https://www.instagram.com/p/DKKlLjUIEgV/] 
[https://www.instagram.com/p/DBqXTcxuLgJ/ https://www.instagram.com/p/DBqXTcxuLgJ/] 
 

==FAQ==
 

===What gimbals are supported?===
All DJI gimbals which are officially supported buy DJI SDR should work. Tested with DJI RS4 and DJI RS4 Pro.
 

===Can I control a focus motor?===
Yes. With a standard USB cables connection from DJI focus motor to RS4 or another DJI Gimbal focus motor works fine.
 

===Can I control additional motors (zoom, IRIS)?===
Yes, but need to use a non-standard connection scheme. Read here please: [[#With_two_motors]]

Cosmostreamer for DJI FPV Goggles V1/V2

2026-08-28T20:22:45Z

Admin: /* From Iphone */

==Product page==
[https://cosmostreamer.com/products/djifpvgoggles/ https://cosmostreamer.com/products/djifpvgoggles/]
 

==Supported Goggles==
*DJI FPV Goggles V1 (max output resolution 720@60p)
*DJI FPV Goggles V2 (max output resolution 810@60p)

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata

==Hardware==
Cosmostreamer for DJI FPV Goggles V1/V2 can work on these boards: 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (can be used as power input)
 

===Raspberry Pi 3B/3B+===
* HDMI port
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - HDMI can't be used.
* Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
* Ethernet 10/100/1000 Mbit/s
* 4 USB 2.0 ports
* 1 micro-USB port for power in
 

===Raspberry Pi Zero/ZeroW===
<pre style="color: red">Not supported due slow CPU</pre>
 

===Raspberry Pi Zero2W===
<pre style="color: red">Not recommended</pre>
* Mini-HDMI port
* Wi-Fi 2.4GHz
* Network features may be limited due the low speed Wi-Fi
* Micro-USB port for power in
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot 
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==

===Power with standard Micro-USB or USB-C port===
USB-C port on Raspberry Pi 4, micro-USB port on Raspberry Pi 3 B/B+/Zero/ZeroW/Zero2W
 

===Power with GPIO (pins)===
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
 
[https://cosmostreamer.com/img/rpi-gpio-pwr.jpg https://cosmostreamer.com/img/rpi-gpio-pwr.jpg]

===Power with PoE===
Only for Raspberry Pi 4B and 3B+. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat].
 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so need to change a "camera type" for using with DJI Goggles V1/V2. 
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI FPV Goggles V1/V2"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process.
 
#Buy license key on a [https://cosmostreamer.com/products/djifpvgoggles/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI FPV Goggles V1/V2 connection==
Use any standard USB-C cable and plug it into any of four USB-A ports on Raspberry Pi. 
[https://cosmostreamer.com/products/djifpvgoggles/diy/img/djifpvgoggles-rpi.jpg https://cosmostreamer.com/products/djifpvgoggles/diy/img/djifpvgoggles-rpi-small.jpg]
 

==Collaboration with DJI Goggles2/Integra==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/Integra, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/Integra" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/Integra" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/Integra and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/Integra" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
#Go to chapter "Info"
#Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles2/Integra"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/v2_g2_cooperative_mode2.png http://cosmostreamer.com/img/v2_g2_cooperative_mode2.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.

<pre style="color:green;">For Raspberry Pi4: HDMI mode setting is available only for HDMI-0 port!</pre>

#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Which goggles version is supported?===
DJI FPV Goggles V1 and V2

===Does it works with DJI Goggles2 or Integra?===
No, need to use another camera type "DJI Goggles2/Integra" ([https://cosmostreamer.com/products/djigoggles2/ product page]) with another license key

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI FPV Goggles V1/V2

2026-08-28T20:22:33Z

Admin: /* From Android smartphone */

==Product page==
[https://cosmostreamer.com/products/djifpvgoggles/ https://cosmostreamer.com/products/djifpvgoggles/]
 

==Supported Goggles==
*DJI FPV Goggles V1 (max output resolution 720@60p)
*DJI FPV Goggles V2 (max output resolution 810@60p)

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata

==Hardware==
Cosmostreamer for DJI FPV Goggles V1/V2 can work on these boards: 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (can be used as power input)
 

===Raspberry Pi 3B/3B+===
* HDMI port
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - HDMI can't be used.
* Wi-Fi 2.4 GHz (RPI 3B) or 2.4/5 GHz (RPI 3B+)
* Ethernet 10/100/1000 Mbit/s
* 4 USB 2.0 ports
* 1 micro-USB port for power in
 

===Raspberry Pi Zero/ZeroW===
<pre style="color: red">Not supported due slow CPU</pre>
 

===Raspberry Pi Zero2W===
<pre style="color: red">Not recommended</pre>
* Mini-HDMI port
* Wi-Fi 2.4GHz
* Network features may be limited due the low speed Wi-Fi
* Micro-USB port for power in
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi HDMI port (if Rpi 4B is used - HDMI-0 port, nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot 
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==

===Power with standard Micro-USB or USB-C port===
USB-C port on Raspberry Pi 4, micro-USB port on Raspberry Pi 3 B/B+/Zero/ZeroW/Zero2W
 

===Power with GPIO (pins)===
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank.
 
[https://cosmostreamer.com/img/rpi-gpio-pwr.jpg https://cosmostreamer.com/img/rpi-gpio-pwr.jpg]

===Power with PoE===
Only for Raspberry Pi 4B and 3B+. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat].
 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. In a browser open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/Integra" by default, so need to change a "camera type" for using with DJI Goggles V1/V2. 
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI FPV Goggles V1/V2"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process.
 
#Buy license key on a [https://cosmostreamer.com/products/djifpvgoggles/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI FPV Goggles V1/V2 connection==
Use any standard USB-C cable and plug it into any of four USB-A ports on Raspberry Pi. 
[https://cosmostreamer.com/products/djifpvgoggles/diy/img/djifpvgoggles-rpi.jpg https://cosmostreamer.com/products/djifpvgoggles/diy/img/djifpvgoggles-rpi-small.jpg]
 

==Collaboration with DJI Goggles2/Integra==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/Integra, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/Integra" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/Integra" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/Integra and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/Integra" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
#Go to chapter "Info"
#Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles2/Integra"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/v2_g2_cooperative_mode2.png http://cosmostreamer.com/img/v2_g2_cooperative_mode2.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.

<pre style="color:green;">For Raspberry Pi4: HDMI mode setting is available only for HDMI-0 port!</pre>

#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
#[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Which goggles version is supported?===
DJI FPV Goggles V1 and V2

===Does it works with DJI Goggles2 or Integra?===
No, need to use another camera type "DJI Goggles2/Integra" ([https://cosmostreamer.com/products/djigoggles2/ product page]) with another license key

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-28T20:21:40Z

Admin: /* From Android smartphone */

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-28T20:21:28Z

Admin: /* From Iphone */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-28T20:21:13Z

Admin: /* From Iphone */

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS] 
4. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
Similar to Iphone, but IP address is different for different smartphone models, so no common IP.
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-28T20:20:45Z

Admin: /* From Iphone */

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
3. Or use a browser and open http://172.20.10.2
 

====From Android smartphone====
Similar to Iphone, but IP address is different for different smartphone models, so no common IP.
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Main Page

2026-08-25T16:48:04Z

Admin: /* DJI FPV Goggles */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC Pro/Pro2/Plus]]
* [[Cosmostreamer for DJI Go4 drones]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Osmo/Osmo+/Osmo Pro/Osmo RAW]]
* [[Cosmostreamer for DJI Pocket Osmo/Pocket2]]
* [[Cosmostreamer for DJI Pocket 3]]
 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
* [[Cosmostreamer for DJI Ronin S/SC/RS2/RSC2/RS3/RS4]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Cosmostreamer for DJI Goggles2/Integra

2026-08-25T16:47:32Z

Admin: Redirected page to Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

#REDIRECT [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. In a browser open http://172.20.10.2
 

====From Android smartphone====
Similar to Iphone, but IP address is different for different smartphone models, so no common IP.
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3

2026-08-25T16:46:20Z

Admin: Created page with "==Product page== [https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/] ==Video review== Video review from Mads Tech <youtube>_jcPW8ybwTo</youtube> Video review from Joshua Bardwell <youtube>yAqGjthAvWc</youtube> <youtube>NgrTSDPsMpY</youtube> ==Supported Goggles== *DJI Goggles N3 (max output resolution 1080@60p) *DJI Goggles3 (max output resolution 1080@60p) *DJI Goggles2 (max..."

==Product page==
[https://cosmostreamer.com/products/djigoggles2/ https://cosmostreamer.com/products/djigoggles2/]
 

==Video review==
Video review from Mads Tech
 
<youtube>_jcPW8ybwTo</youtube>
 
Video review from Joshua Bardwell
 
<youtube>yAqGjthAvWc</youtube>
 
<youtube>NgrTSDPsMpY</youtube>
 

==Supported Goggles==
*DJI Goggles N3 (max output resolution 1080@60p)
*DJI Goggles3 (max output resolution 1080@60p)
*DJI Goggles2 (max output resolution 1080@60p)
*DJI Integra (max output resolution 1080@60p)
 

==Supported Air Units and drones==
If goggles can be paired with a drone or air unit and shows video - the same video will be available in Cosmostreamer. 
* DJI O4 air unit Pro
* DJI O4 air unit
* DJI O3 air unit
* DJI air unit (old)
* Caddx Vista (all models)
* DJI FPV drone
* DJI Avata
* DJI Avata 2
* DJI Avata 360
* DJI Mini 3 Pro
* DJI Mini 4 Pro
* DJI Air 3
* DJI Air 3s (when DJI add support for working with the goggles)
* DJI Neo
* DJI Neo 2
 

==Hardware==
Cosmostreamer for DJI Goggles2/3/Integra/N3 can work on these boards: 
 
===Raspberry Pi 4B===
Any RAM size. 1Gb, 2Gb, 4Gb, 8Gb.
* Two micro-HDMI outs
* Analog video out (CVBS, TV-out) in 3.5 mini-jack
* DSI display may be used. If DSI display connected - only HDMI-0 may be used.
* Wi-Fi 2.4/5 GHz
* Ethernet 10/100/1000 Mbit/s
* 2 USB 2.0 ports + 2 USB 3.0 ports
* 1 USB-C port (used for DJI Goggles2/3/Integra connection)
 

===Raspberry Pi Zero/ZeroW===
Cosmostreamer can be run but Zero/ZeroW is too slow single core CPU, so works very bad.
 

===Raspberry Pi Zero2W===
* Mini-HDMI port
* Wi-Fi 2.4GHz/5GHz
<pre style="color: red">Especially for those who don't read instructions carefully - Rpi Zero2W can be used with the goggles, but not with DJI Fly license!</pre>
 

===Raspberry Pi 3B/3B+===
<pre style="color: red">Not supported due USB incompatibility</pre>
 

===Raspberry Pi 5===
<pre style="color: red">Not supported </pre>
Without a hardware H264 video decoder this is a bad choice for using with Cosmostreamer.
 

==Common connections scheme==
[[File:Dji-goggles-connection.png|800px]]
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi. Raspberry Pi must start booting. A couple of reboots may be during the first boot process. This is just for initial Cosmostreamer's set up. For the normal Raspberry Pi power when the goggles are connected use a power scheme from the chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]).
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Power for Raspberry Pi==
For using with DJI Goggles2/3/Integra/N3 Raspberry Pi 4 must be powered ONLY from GPIO or from PoE adapter.
 

===Power with GPIO (pins)===
The best way. Works always. 
Use any USB cable, need to cut it and connect to the RPI only 2 wires - Red (5V) and Black (Gnd). Then you can use it with any standard USB power supply or powerbank with an USB-A port. Power supply or powerbank with USB-C port usually does not output 5V by default, so it can't be used without adding of negotiation resistors or PD-trigger scheme, so just use USB-A port instead. 

====With one 5V and one Gnd pin====
Minimal variant. But make sure the wires are not too thin, otherwise they may not be able to carry enough current. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pin 2
GND goes to pin 6 (or any other GND pin, check the Raspberry Pi pinout scheme below)</pre>
[[File:Rpi4b-power-1.png|800px]]
 

====With two 5V and two Gnd pins====
A bit more difficult to connect, but more stable under load. You just need to connect the same wire to two pins. Two pins for 5V and two pins for GND. Recommended wire cross-section: 2.0 mm² or larger.
 
<pre>5V goes to pins 2 and 4
GND goes to pins 6 and 14 (or any other GND pins, check the Raspberry Pi pinout scheme below)</pre>

[[File:Rpi4b-power-2.png|800px]]
 

====Raspberry Pi 4 pinout====
[[File:Rpi4-pinout.png|800px]]
 



===Power with PoE===
Only for Raspberry Pi 4B. Need to use [https://www.raspberrypi.org/products/poe-hat/ PoE Hat]. 
[https://cosmostreamer.com/img/poe-hat.jpg https://cosmostreamer.com/img/poe-hat-small.jpg]
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. In a browser open http://172.20.10.2
 

====From Android smartphone====
Similar to Iphone, but IP address is different for different smartphone models, so no common IP.
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so not needed to change a "camera type". But if camera type was changed and need to change again - do next step:
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3"
#Disable option "Allow auto detection" if enabled
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [https://cosmostreamer.com/products/djigoggles2/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==DJI Goggles2/3/Integra/N3 connection==

===Standard USB-C to USB-C cable===
<pre style="color: red">Works only with Goggles3, Integra, N3. But not with the Goggles2!</pre>

Just plug one side into the goggles and another side into Raspberry Pi USB-C port.
 

===Custom USB-C to USB-C cable===
Most stable method. 

<pre style="color: red">Red wire (5V) must be cut for using with the Goggles2</pre>

For Goggles2 a standard cable can't be used, need to made a custom cable. Take any USB-C to USB-C cable and cut the red wire inside (5 Volts lane). 
For Goggles3/Integra/N3 it possible to use a standard USB-C to USB-C cable. 

[https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usb-c-custom-cable-scheme-small.jpg] 
 



===Standard USB-C cable and USB-C OTG adapter===
This connection need to unplug/plug again the cable if no video. 
[https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2.jpg https://cosmostreamer.com/products/djigoggles2/diy/img/usbc-otg-cable-goggles2-small2.jpg]
 

==Collaboration with DJI Goggles V1/V2==

===Exclusive mode===
In a case of using Raspberry Pi 4 it is possible to use both types, V1/V2 and Goggles2/3/Integra/N3, without a manual changing a "camera type".
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type "DJI Goggles2/3/Integra/N3" or "DJI FPV Goggles V1/V2"
#Enable option "Allow auto detection"
#Don't forget to click "Save" button.

Now Cosmostreamer will cyclically run one and another apps and if one type of Goggles is plugged - it will be used for video capture. Another goggles will be ignored. 

<youtube>NgrTSDPsMpY</youtube>
 

===Cooperative mode===
Both DJI Goggles2/3/Integra/N3 and DJI FPV Goggles V1/V2 can work at the same time.
<pre style="color:green">Both licenses, for "DJI FPV Goggles V1/V2" and for "DJI Goggles2/3/Integra/N3" must be already installed!</pre>
# Open web admin page or run CosmoViewerNG application
# Open device settings
# Go to chapter "Info"
# Disable option "Allow auto detection"
# Go to chapter "Secondary camera"
# Choose "Secondary camera type" "DJI Goggles V1/V2"
# Choose where to show video, on HDMI-0 port, on HDMI-1 port or on DSI display
# If you want to show video fullscreen - enable option "Show fullscreen"
# If you want to show video in window - enter window params in format X, Y, W, H where X - horizontal offset from the left display side, Y - vertical offset from the top display side, W - window width, H - window height. For example: 50,50,640,400
# Click "Save" button
[http://cosmostreamer.com/img/g2_v2_cooperative_mode.png http://cosmostreamer.com/img/g2_v2_cooperative_mode.png]
 

==HDMI modes==
Since one of the main use cases of the Cosmostreamer is video output via HDMI, it is useful to be able to set the HDMI output to the desired mode.
 
When HDMI cable is plugged to the Raspberry Pi before power on, default HDMI mode will be choosed during initial handshake between Raspberry Pi and HDMI display. Usually it is the maximal HDMI display resolution and framerate. If no HDMI cable plugged when Raspberry Pi powered on - default resolution 640x480 will be enabled and does not changed if HDMI display will be plugged. This resolution can be overrided in Cosmostreamer settings.
 
For HDMI-1 port need to plug an HDMI monitor before Raspberry Pi is powered on to get signal.
 
#Open [[#Settings_and_controls| Device settings]]
#Go to chater "Display"
#Open tab "Main display"
#Check video output is "HDMI"
#Set needed HDMI mode. This mode will be used even if no HDMI cable is plugged before Raspberry Pi powered on.

[http://cosmostreamer.com/img/hdmi-modes.png http://cosmostreamer.com/img/hdmi-modes-small.png]

 

==Downloads==
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
*[http://cosmostreamer.com/apps/cosmostreamer-ng/download/Cosmostreamer-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[http://cosmostreamer.com//apps/cosmostreamer-ng/download/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf Download Cosmostreamer Lite Box wiring manual PDF] 

 

==FAQ==
===Which goggles version is supported?===
DJI Goggles2, Goggles3, DJI Integra, DJI Goggles N3

===Does it works with DJI FPV Goggles V1/V2?===
No, need to use another camera type "DJI FPV Goggles V1/V2" ([https://cosmostreamer.com/products/djifpvgoggles/ product page]) with another license key

===Clean HDMI video without OSD?===
Goggles menu, Setting -> Camera -> Advanced Camera Settings -> Camera View Recording -> OFF 
Demo: https://www.instagram.com/p/DGikg-PI6RA/

===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Goggles]][[Category:FPV]] [[Category:DJI]]

Main Page

2026-08-25T16:45:52Z

Admin: /* DJI FPV Goggles */

== Cosmostreamer settings==
* [[Cosmostreamer settings]]
 

== Cosmostreamer "camera types" ==

===DJI FPV Goggles===
* [[Cosmostreamer for DJI FPV Goggles V1/V2]]
* [[Cosmostreamer for DJI Goggles2/Integra]] (and Googles3)
* [[Cosmostreamer for DJI Goggles2/Goggles3/Integra/N3]]
 

===DJI Drones===
* [[Cosmostreamer for DJI Fly drones]]
* [[Cosmostreamer for DJI RC Pro/Pro2/Plus]]
* [[Cosmostreamer for DJI Go4 drones]]
 

===DJI Cameras===
* [[Cosmostreamer for DJI Osmo/Osmo+/Osmo Pro/Osmo RAW]]
* [[Cosmostreamer for DJI Pocket Osmo/Pocket2]]
* [[Cosmostreamer for DJI Pocket 3]]
 

===DJI Gimbals===
* [[Cosmostreamer for DJI SDR with DJI gimbals]]
* [[Cosmostreamer for DJI Ronin S/SC/RS2/RSC2/RS3/RS4]]
 

== Instructions ==

* [[JSON API]]
* [[Bitfocus Companion module]]
* [[Bitfocus Companion module (old)]]
* [[OBS Gstreamer plugin]]
* [[Streaming into vMix]]
* [[QGroundControl and video from Cosmostreamer]]

 

== Software ==

==== For Raspberry Pi ====
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Cosmostreamer microSD image]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest update file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file]
* [https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files]

 

=== Clients ===

* [[CosmoViewerNG for Windows]]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/ CosmoViewerNG for Mac]
* [https://cosmostreamer.com/apps/cosmoviewer-ng-oculus/ CosmoViewerNG for Oculus Quest/Quest2]

 

== Social media ==
* [https://www.youtube.com/channel/UC2KU3fMZMHWajL9qNIQcB2A Youtube channel]
* [https://www.instagram.com/cosmostreamer/ Instagram]
* [https://t.me/cosmostreamer_group Telegram]
* [https://www.facebook.com/cosmostreamer Facebook]
* [https://twitter.com/CosmoStreamer Twitter]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:16:41Z

Admin:

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:15:54Z

Admin: /* Control panel connection */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
===SKAARHOJ===
===Atem Mini===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:14:35Z

Admin: /* DJI RC2 */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
The DJI RC 2 does not have an HDMI port, so Cosmostreamer can control it, but video output is unavailable. Only the DJI RC 2’s built-in RTMP streaming feature can be used. 
 
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:12:50Z

Admin: /* Controller connection */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a standard USB-C to USB-A cable. Connect the USB-C end to the controller and the USB-A end to one of the Raspberry Pi’s full-size USB-A ports.
 

===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:11:54Z

Admin: /* Controller connection */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
Use a regular USB-C to USB-A cable and connect it to the USB-C port on the controller.
 

===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:11:44Z

Admin: /* DJI RC2 */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:11:36Z

Admin: /* DJI RC2 */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
Use a regular USB-C to USB-A cable and connect it to the USB-C port on the controller.
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:10:47Z

Admin: /* DJI RC Pro 2 */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:10:42Z

Admin: /* DJI RC Pro */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
No photo yet, just connect to the USB-C port on this controller.
 

===DJI RC Pro 2===
===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:10:11Z

Admin: /* DJI RC Plus */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
===DJI RC Pro 2===
===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

File:DJI RC Plus with Cosmostreamer license type 38 v2.jpg

2026-08-22T13:10:03Z

Admin:

DJI RC Plus with Cosmostreamer license type 38 v2

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:07:52Z

Admin: /* DJI RC Plus */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
===DJI RC Pro 2===
===DJI RC Plus===
[[File:DJI RC Plus with Cosmostreamer license type 38.jpg|800px|none]]
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:07:08Z

Admin: /* Controller connection */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
===DJI RC Pro 2===
===DJI RC Plus===
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]

Cosmostreamer for DJI RC Pro/Pro2/Plus

2026-08-22T13:06:59Z

Admin: /* DJI RC2 */

==Product page==
Not ready yet
 

==Demo video==
Coming soon...
 

==Supported Controllers==
* DJI RC2
* DJI RC Pro
* DJI RC Pro 2
* DJI RC Plus
* DJI RC Plus 2
 

==Supported Drones==
Any drone which work with DJI RC2, DJI RC Pro, RC Pro 2, RC Plus, RC Plus 2 controllers.
<pre style="color: red">No video, no telemetry, control only!!!</pre>

Tested with:
* DJI Mavic 4 Pro and DJI RC Pro 2
* DJI Matrice M300 and DJI RC Plus
 

==Hardware==
Cosmostreamer for DJI RC Pro/Pro2/Plus can work on these boards:
 
* Raspberry Pi 4B
* Raspberry Pi 3B/3B+

<pre style="color: red">Raspberry Pi 5 is not supported!</pre>
 

==Power for Raspberry Pi==
You can use a standard USB cable for the Raspberry Pi power.
 

==Common connections scheme==
Add image...
 

==Installing the Cosmostreamer firmware==
# Get a blank microSD card of 8GB or larger. Insert the microSD card into the card reader
# Download [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip ZIP-archive] with firmware content
# Extract .img file from downloaded ZIP archive
# Use [https://cosmostreamer.com/dl/win32diskimager-1.0.0-install.exe Win32DiskImager] on Windows or [https://www.balena.io/etcher/ Balena Etcher] on Mac and write .img file on microSD card
# Insert the microSD card into the Raspberry Pi
# If you have a monitor or a TV with HDMI input - plug it to the Raspberry Pi 4B HDMI-0 port (nearest to USB-C port)
# Plug a standard USB power supply or powerbank to the Raspberry Pi (go to chapter [[#Power_for_Raspberry_Pi| Power for Raspberry Pi]]). Raspberry Pi must start booting. A couple of reboots may be during the first boot process.
# MicroSD image contains not the latest firmware version, so don't forget to update firmware to the latest, see chapter [[#Firmware_update| Firmware update]]).
 

==Network connection==

===Ethernet===
Only for Raspberry Pi versions with Ethernet port. Connect Ethernet cable to the Raspberry Pi Ethernet port at one side and home router or PC/Mac Ethernet port on another side
 

===Wi-Fi===
Connect your PC/Mac or smartphone to Wi-Fi network '''cosmostreamer''', password '''1234512345'''
 

===USB===
It's possible to plug a smartphone to the Cosmostreamer device using a standard USB cable.
 

====From Iphone====
1. Plug USB cable from Iphone to one of four USB-A ports on the Raspberry Pi 4. Iphone will show "Trust this computer?" message. Press "Trust". 
2. Turn on modem mode on the Iphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-ios/ CosmoViewerNG app for IOS]
 

====From Android smartphone====
1. Plug USB cable from Android smartphone to one of four USB-A ports on the Raspberry Pi 4. 
2. Turn on modem mode on the smartphone. 
3. Run [https://cosmostreamer.com/apps/cosmoviewer-ng-android/ CosmoViewerNG app for Android]
 

==Settings and controls==

===Browser In Wi-Fi Access Point mode===
Also you could open Cosmostreamer web admin page in browser 

[http://192.168.50.1 http://192.168.50.1] 
[http://my.cosmostreamer.com http://my.cosmostreamer.com] 

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.

===Browser in WLAN client mode===
Open in browser [http://cosmostreamer.local http://cosmostreamer.local] 
This is dynamical host name so may not work properly if multiple Cosmostreamer devices in the same network or IP changes.

Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Browser with Iphone USB modem mode===
Open in browser [http://172.20.10.2 http://172.20.10.2] 
Then click "Device settings" in menu shown by click on Menu icon in right bottom corner.
 

===Windows application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng/#download CosmoViewerNG application].
 

===Mac application===
Download, install and run [https://cosmostreamer.com/apps/cosmoviewer-ng-mac/#download CosmoViewerNG application] 
 

==Firmware update==
<pre style="color: red">Don't skip ths step, because the microSD image does not contains a latest firmware version!</pre>

#Run CosmoViewerNG for Win or for Mac or open web page and then open device settings, chapter "System"
#Download the [https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file]
#Choose downloaded update file (with .csuf extension) in "Firmware update" field and press "Upload file" button
#Raspberry Pi must goes to reboot automatically after update installed
 

==Changing camera type==
In Cosmostreamer system terminology, a camera is any device that Cosmostreamer can work with. DJI Pocket, DJI Osmo, Goggles - this all a "camera". 
MicroSD image with Cosmostreamer configured for "DJI Goggles2/3/Integra/N3" by default, so needed to change a "camera type".
#Open device settings in CosmoViewerNG application or in web interface
#Go to chapter "Info"
#Choose camera type #38 - "DJI RC Pro/Pro2"
#Don't forget to click "Save" button.
 

==License key==
License key is a text string, unique for each Raspberry Pi. Each camera type needs different license keys. It's possible to install multiple amount of license keys on one device and use this device for some camera types, i.e. Pocket Osmo, Pocket 2, and others. Need to buy license for correct operation process. 
#Buy license key on a [http://cosmostreamer.com/products/djircpro/ product page]
#Make a photo of HDMI display or screenshot of the app with a QR image and send it in email on [mailto:cosmostreamer@gmail.com cosmostreamer@gmail.com] for making a license key
#When you got a license key - use web interface or CosmoViewerNG application, menu "device settings" -> "License" and insert license key into field. And click "Install license" button.
 

==Controller connection==
===DJI RC2===
[[File:DJI RC2 with Cosmostreamer for license type 38.jpg|800px|none]]
 

===DJI RC Pro===
===DJI RC Pro 2===
===DJI RC Plus===
 

==Joystick connection==
 

==Control panel connection==
===Bitfocus Companion for Streamdeck===
 

==Downloads==
*[http://cosmostreamer.com/products/djiflydrones/Cosmostreamer-DJI-Fly-Drones-WiringManual.pdf Download Cosmostreamer Box wiring manual PDF] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.sdcard.zip Full microSD image with firmware] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/cosmostreamer-ng.csuf Latest firmware update file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/changelog.txt Changelog file] 
*[https://cosmostreamer.com/apps/cosmostreamer-ng/download/ All files] 
 

==FAQ==
===Can I just unplug the power cable from the box?===
Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

[[Category:Drones]][[Category:FPV]] [[Category:DJI]]