You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

CosmostreamerInsta360 Evo

A lot of connection variants with RPI4B box version
Connections with RPI3A+ box version
Box version RPI4B
Box version RPI3A+
Box version JetsonNano
Cosmostreamer Insta360 Evo box versions

Cosmostreamerfor Insta360 Evo

A small black box with a microcomputer inside allows you to remotely control the camera, output a video stream via HDMI, stream video on a local network or over the Internet. And many other possibilities ...

Cosmostreamer connects to Insta360 Evo and receives video, which are then transmitted to the HDMI output or in local network.

Video stream from Insta360 Evo is very heavy, 30-50 Mbit/s (depends on resolution). Cosmostreamer may decode video and show on HDMI only if resolution is not higher than 1080p.

Cosmostreamer may be connected to Insta360 Evo only with Wi-Fi.


Features

  • Video receiving from Insta360 Evo (video only, no audio!) and stream in local network or via Internet. But a good internet connection is needed for sending video with bitrate 30-50 Mbit/s.
  • Video output on HDMI works if resolution is not higher than 1080p
  • Native video from Insta360 Evo is a two-fisheye in one frame with resolutions 1920x960, 2176x1088, 2560x1280, 3840x1920. Also available two independent streams from each sensor with resolution 2560x2560 each.
  • Video transmition in RTSP, SRT, RTMP, raw UDP H264 protocols
  • Recording video from camera on internal microSD card or USB flash drive
01

Cosmostreamer box RPI4B

Based on Raspberry Pi 4B. Two micro-HDMI outputs, Wi-Fi 2.4/5GHz, Ethernet 10/100/1000 Mbit/s, 4 USB ports. Power via standard USB-C cable (or any 5V).

Included: hardware, license key, email/Whatsapp/Telegram online support

$230
02

Cosmostreamer box RPI3B+

Based on Raspberry Pi 3B+. Full-size HDMI output, Wi-Fi 2.4/5GHz, Ethernet 10/100 Mbit/s, 4 USB 2.0 ports.

Included: hardware, license key, email/Whatsapp/Telegram online support

$220
03

DIY license key only

A text string that must be saved on the Cosmostreamer for the camera to work. Read DIY instructions

$100

Applications

CosmoViewerNG is a main control application for Cosmostreamer.

 

DIY

This is the cheapest and fastest way to get a Cosmostreamer!

Go to DIY page

FAQ

Q: Can I just unplug the power cable from the box??
A: Yes, the file system on the microSD is in read-only mode, so you can unplug the power cable without any problem

Comments

Contacts

If you have any questions about the Cosmostreamer, fill your name, e-mail and your message using the form below. We are always glad to help you!

Check your spam folder on your mail server, the answer may be there.